Have I got super aggressive wheels on the Benz?

I'm running 19s ET35 front and rear. Not slammed as I need to do a few arch mods before they sit neatly.

 

Post Pics ^^^^^^^

 

the CV4's

 

Thought of the day, if I run a 9inch on the back cant I run a loweroffset?

 

Yes you can run a lower offset but all that will do is give you more back spacing. The concern here is where the front lip and tire edge fall. Regardless of the width and offset you can only poke so far before having issues.

I may order new wheels and run a 19x9 ET45 front and a 19x10 ET45 rear. I measured everything and if I stick with the same tires sizes I run now the stretch will be a little more and i should be poking my fenders by about 6mm.

Ignore all other tire fitment calculators, use this to get your wheels exactly how you want and need them!

http://www.willtheyfit.com/

 

Shows amount of stretch and everything! Now I shared my secret weapon with all of you

 

here is a quick pic.

REARS 19 X 9.5 ET35.
only rubs when i have passengers in the rear. Need to do some arch rubbing before I can lower it.


Uploaded with ImageShack.us

 

Very nice, I like the stance not ultra aggresive but at the same time you have a nice little poke and your still functional.

 

I pulled the trigger on that Rennen deal got some 19x8.5 and 19x10 coming. Now Im trying to figure out what tires I can run on these bad boys.

 

I just mounted some 235/35R19 and 265/30R19 tires onto the Braelin BR01 in 19x8.5 and 19x10 +45 all around.

I will be bolting them up to the car tomorrow. Should be nice and flush to the fender or hopefully with a little bit of poke.

 

Nice make sure you throw some pics up

 

I promise

 

On my wife's car

Braelin BR01 www.braelinalloy.ca
19x8.5 +45
19x10 +45

235/35R19
265/30R19

Stock ride height but with 2 mounted wheels in the trunk

It's not that aggressive but sits nice.





and here's my Wagon:

 

How is the ride quality?

 

Very nice. Makes me want a w212 wagon.

 

Love that wagon and for the C class very nice.

 

It rides very smooth, but it does rub over dips (with 2 mounted wheels/tires in the trunk) in the rear.I'm going to tug a bit on the fenders to see if that helps.

 

that wagon is so sick

 

whats your favourite colour??

 

Question - are you saying the CV2 will be available in 19" ???

I've popped that question to one of the suppliers on here twice and was told CV2 is only ever available in 20" !!!

I'd definitely be up for a set of CV2's in 19"

Apologies if I've misread your post.

 

Just a little update if anybody cares which I doubt! Just ordered a set of 19x8.5 front and 19x10 rennen forged. should have them in two months (sad face)

 

All this talk and not one pic, bummer. Wish at least one of the four guys with a stanced set up would post pics.

 

Yo B! Ever hear you resemble Obama? Cus dude you actually remind me of him like crazy lol

 

I do have an aggressive set up (rear wheels anyways). I think it may even be too aggressive for people on the forums because most aren't into the stance scene like I am. Don't have any new pictures either because my wheels are currently off again. However I will put some pics up when I get my next set up put on but that's in about a month or so.

 

I should have mine setup on in about 6 weeks, throwing on some 19x9 and 19x10 Rennen forged monoblocks.