Crack in windshield !!! :(
#1
Member
Thread Starter
![Question](https://mbworld.org/forums/images/icons/icon5.gif)
Was driving on I75 today and a little rock cracked my windshield
Any suggestion what to do, repair ? Im not familiar precisely with the Cracked windshield laws insurance and regulations.
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
Thank you.
![](http://imageshack.us/a/img13/4449/bgr4089.jpg)
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
Thank you.
![](http://imageshack.us/a/img13/4449/bgr4089.jpg)
![](http://imageshack.us/a/img42/5244/bgr4090.jpg)
#2
Member
Join Date: Nov 2012
Location: Montreal
Posts: 134
Likes: 0
Received 4 Likes
on
4 Posts
C350 2010, BMW 325i 2001, Porsche turbo 996 2002.
Here in Montreal they fix crack up to one inch by injecting glue. You better check that out asap because the crack can get a lot longer especially if you go to high speed or hit a good pot hole. I am sure in Tampa you can found very good windshield specialist or a glass doctor....
#5
Member
I had two cracked windshields in one year with each about the size of a quarter. Have it fixed asap before it gets worse. Your auto insurance usually waives any deductible for safelite to come out and inject it. Although not perfect in appearence it will look 90% better and protect the windshield from additional damage. I feel your pain....
#6
MBWorld Fanatic!
Here it depends on where it is whether you can pass registration. Have it done professionally . It is not DIY unless you have the vacuum tool.About $50 here in Australia.Get a few quotes of course !!
Last edited by Carsy; 12-18-2012 at 01:35 AM.
Trending Topics
#9
Member
Thread Starter
They were using DIY kit, not very professional , i will try to find someone more
professional, with drilling , something like this.
learning from my mistakes
professional, with drilling , something like this.
learning from my mistakes
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
#10
Senior Member
Join Date: May 2002
Location: Shanghai, China
Posts: 296
Likes: 0
Received 1 Like
on
1 Post
2012 C200 CGI
they have diy kits that work like a charm and super cheap. However now that they've done a crappy job sealing it, I don't think you'll be able to redo it again. Unfortunately you're stuck with looking at the crack now unless you replace the whole windshield
http://www.youtube.com/playlist?list=PL6BD60724EFE48B41
http://www.youtube.com/playlist?list=PL6BD60724EFE48B41