res2000

Can any1 help me out or recommend some1 to help me to change these settings ?
I have xentry diagnostic but can't generate password to apply these changes...
Mercedes dealership refused to help.

c300 4matic 2013

Knightmare69

Er.........maybe clarify your problem cuz I have no clue what you're talking about. Did you install a HID pnp kit and getting a dash light now or something?

res2000

Sorry, i installed after market HID kit (with harness) at first, so there was no way to get rid off that error code on a dashboard, then I've connected everything straight to inverters but now computer senses the error (if engine is on; on battery it runs fine) lights start flickering and then go off. I tried to use capacitors with no luck.... My only suggestion would be to change xenon=present in diagnostic menu.

Knightmare69

Sounds like you don't have the proper canbus harness for your hid kits. You can get some from the retrofit source.

res2000

well i would like to change onboard computer settings first to xenon=present to see if this will resolve the issue but I need to find someone who can do it (central nj area) or if anyone can generate xentry pass for my vin#

mir_m

You just need a canbus hid kit changing the setting
With xentry will not help you

Knightmare69

That's what I tried telling the OP.