2012 c300 v1 hardwire
06-10-2013, 08:59 PM
#1
Member
Thread Starter
2012 c300 v1 hardwire
Hey guys,
Picking up a 2012 c300 next week and want to hardwire my V1.
Just searched through a lot of threads and have not found once that has the instructions on how to hardwire a Valentine 1 in a 2012 c300. In my previous cars, I've hardwired it to the window lockout fuse in the fuse box, this required running it down the A pillar. This time I want to tap it into the sunroof/lights but unfortunately I don't have a voltmeter to know which wire to tap into.
Are there any updated DIY for hardwiring a V1 (or a dash cam for that matter)?
Picking up a 2012 c300 next week and want to hardwire my V1.
Just searched through a lot of threads and have not found once that has the instructions on how to hardwire a Valentine 1 in a 2012 c300. In my previous cars, I've hardwired it to the window lockout fuse in the fuse box, this required running it down the A pillar. This time I want to tap it into the sunroof/lights but unfortunately I don't have a voltmeter to know which wire to tap into.
Are there any updated DIY for hardwiring a V1 (or a dash cam for that matter)?
06-10-2013, 09:03 PM
#2
MBWorld Fanatic!
Hey guys,
Picking up a 2012 c300 next week and want to hardwire my V1.
Just searched through a lot of threads and have not found once that has the instructions on how to hardwire a Valentine 1 in a 2012 c300. In my previous cars, I've hardwired it to the window lockout fuse in the fuse box, this required running it down the A pillar. This time I want to tap it into the sunroof/lights but unfortunately I don't have a voltmeter to know which wire to tap into.
Are there any updated DIY for hardwiring a V1 (or a dash cam for that matter)?
Picking up a 2012 c300 next week and want to hardwire my V1.
Just searched through a lot of threads and have not found once that has the instructions on how to hardwire a Valentine 1 in a 2012 c300. In my previous cars, I've hardwired it to the window lockout fuse in the fuse box, this required running it down the A pillar. This time I want to tap it into the sunroof/lights but unfortunately I don't have a voltmeter to know which wire to tap into.
Are there any updated DIY for hardwiring a V1 (or a dash cam for that matter)?
06-11-2013, 11:21 AM
#3
Senior Member
I used this thread to hardwire mine. It works great. Good luck.
