Description: C63 style wheels

We are excited to offer the C63 style wheels close to stock offset



WHEEL SPECIFICATIONS

Price: $599 Staggered $549 Non Staggered
Size: 18x8/9
Offset: Front: 45mm Rear: 54mm
Weight: ~24lbs
Hub size: 66.6mm
Bolt Pattern: 5x112
Finish: Gun Machined Face
Shipping: $85


WARRANTY
Our wheels are made at an OEM factory so we are proud to offer the following:
2 Years Finish Warranty: Many replica wheels finish can be sub par and the finish can crack or peel off. Since our wheels come out of an OEM process, the paint and clear coat thickness is similar to OEM standards.

Manufacturing Defect Warranty: The wheels are made in a low pressure casting process like OEM wheels do and go through rigorous quality controls including 100% x-ray, leak and balancing tests. They are guarantied to fit on your car without vibrations or pulling.

Fitment Warranty: You don't have to know the technical specifications of the wheels your car takes, you can lean on our experience knowing what fits your car. If we get it wrong, we will support you as much as we can, or we will take full responsibility and give you a refund.

The wheels are in stock and we can also quote wheel and tire packages.
We do not make money on tires or on shipping, it is just a service we offer to our customers, we recognize not everyone has the time to drop off wheels and tires at their local tire store and waste half a day to get them mounted and balanced.

We will mount and balance them for you and take on the risk of getting it right. We have had many customers that called us after getting their wheels mounted telling us that the tire shop scratched them and asked for replacements. So we focused on putting the synergies in place that allows us to offer that service.

You can always call us at 248 686 2035 if you have any questions.

Thanks for looking!

 

Wish these came in 19"!!!

 

Thank you, unfortunately they are only available in 18s at this point in time.

 

I've bought 3 sets of wheels from PowerWheelsPro for our MBs....excellent quality and service!

 

I'll vouch for Vassili as well. Buy with confidence.

Thank god these aren't F:18x8.5+45 and R:18x9.5+54 or else I'd be jealous, since you can run 235/40-18 on fronts and 265/35-18 on rears without ANY rubbing on full compression.

 

Thank you guys, you are too kind

Regarding the offset, you are right, the 8.5/9.5 setup would need to have a higher rear offset to make sure there is no rubbing. We have had a few customers that wanted more of a stock fitment on their wheels so I am excited to bring these in these specs 8/9 and 45mm/54mm, they will work great

Thanks again

 

Please make a set in 19", I will place my order now !

 

will these fit my C32amg?

 

Man the rims look nice, but I am hating that AMG logo sticker. Can't you guys engrave/stamp it? It just looks cheap IMO to have a sticker there.

 

supersunny, thank you for the input, we will work with the factory to make it in 19s.

C3Duece, your C32 has a very special fitment, it takes wheels with a very low offset, like a 25mm on a 8" rim, due to the very big brakes on your car. These would work no problem if you were ok using a set of spacers all around, they would be around $100 on ebay.


Andriy242, thank you, we understand that most customers would prefer the engraved AMG on the lip, the problem is that Mercedes didn't appreciate the use of their logo in the engraving as it looks causes customer confusion as people would think the replicas are OEM. SO they requested all the factories to remove it from the molds.
If you don't like it on the wheel you can just run them without it, the blank spot under there is finished like the rest of the wheel.

Thank you