Kulin

Hello.

I'm new member, hello for everyone.

I have big problem. In my one door (front door passenger side) door lock not work. I removed door panel, but I don't now how removed metal panel, I removed the rivets but can't draw metal panel with glass.
Please help me.

Thanks.

Kulin
ps. sorry for my english

dudeitsmattx

Sounds like a bad actuator

Kulin

Yes, you have write. I must change acuator, but I can't remove the aluminum cover

hammer2514

i am experiencing same problem on the left front door. I think its the actuator also. How did you come to your conclusion of a faulty actuator?

Kulin

At the beginning of the actuator sometimes closed and opened door, then completely stopped working. Thus, it seemed to me that the actuator, not control.
Now I know how to replace it

hammer2514

Mine has done the same thing. First it was intermittent, now it does not work at all. Looks like I will have to replace mine also. Looking at your pictures, once I remove the door panel (which I have already done before to check if actuator was binding) I assume you have to drill out the rivets to remove the aluminum plate, then remove the actuator. Is this the procedure you followed. Any help would be appreciated.

Kulin

Today I'll prepare few pictures...

Kulin

Please look to my instruction.

Sorry but this is polish version, if necessary I'll prepare englisg version

hammer2514

thanks brother, I will translate with google and attempt this week. I will let you know how I made out!

Kulin

OK. This isn't difficult. If You something don't know, write to me.

Good Luck !!

Kulin