TORQUE SPECS - TORQUE SPECIFICATIONS
#1
Senior Member
Thread Starter
TORQUE SPECS - TORQUE SPECIFICATIONS
I would like to request a Sticky for Torque Specs. If anybody respond to this thread with Torque specs, I will add it to this list and sort them alphabetically. If there is a comprehensive list out there somewhere, please share. I've done a search on the forum, and these are the concrete ones I've found so far. Most of the threads were posts of people requesting torque specs but without any response. Please share if you have other specs. Thank you.
*Rear Lower Control Arm Bolts: 50 Nm (36.9 lb-ft) and 90 degrees ( Axle Carrier - bolt near the center of the car), 80 Nm (59 lb-ft) and 90 degrees (Wheel Carrier - outer bolt near the wheel)
*Sheave Pulley (for C300 drive belt): 35 Nm (25.8 lb-ft) (idler pulley, part number A 272 202 10 19)
*Spark Plugs: 20-25 Nm (15-18 lb-ft)
*Wheel Lug Nuts: 130 Nm (96 lb-ft)
*
*Rear Lower Control Arm Bolts: 50 Nm (36.9 lb-ft) and 90 degrees ( Axle Carrier - bolt near the center of the car), 80 Nm (59 lb-ft) and 90 degrees (Wheel Carrier - outer bolt near the wheel)
*Sheave Pulley (for C300 drive belt): 35 Nm (25.8 lb-ft) (idler pulley, part number A 272 202 10 19)
*Spark Plugs: 20-25 Nm (15-18 lb-ft)
*Wheel Lug Nuts: 130 Nm (96 lb-ft)
*
Last edited by romeo291; 05-18-2015 at 09:36 AM.
#2
Super Member
Join Date: Dec 2010
Location: Fort Myers, Florida
Posts: 846
Likes: 0
Received 1 Like
on
1 Post
2013 C250 Sport
Be sure to note that for the rear lower control arm that's for the bolt near the center of the car. The other control are bolt that is on the outer of the car near the wheel is 80nm and 90 degrees.
Real Lower Control Arm
Axel Carrier 50nm and 90 degrees
Wheel Carrier 80nm and 90 degrees
Real Lower Control Arm
Axel Carrier 50nm and 90 degrees
Wheel Carrier 80nm and 90 degrees
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)