W204 & Thinkware Dashcam
Thread Starter
Junior Member
Joined: Jun 2012
Posts: 19
Likes: 1
From: Brooklyn NY/Norfolk VA/Trinidad
18 C300 4Matic.
W204 & Thinkware Dashcam
Got a nice Thinkware F750 Dashcam with the hardwire installation kit but only thing is that thinkware doesn't offer an actual guide for Mercedes C class installation. 🤦🏾*♂️
My 2013 C300 has the fuse box in the trunk so I've ran/tucked the wires all the way from the front to the trunk, then grounded the "ground" wire n well ..... I'm stuck from after that. 🤷🏽*♂️
So the Red wire & the Yellow wire are just sitting their until I can find out exactly what fuses they go to. Like actual fuse numbers that show on the fuse box layout.
So can anyone offer some insight into this???
It would be greatly appreciated. 💆🏽*♂️
My 2013 C300 has the fuse box in the trunk so I've ran/tucked the wires all the way from the front to the trunk, then grounded the "ground" wire n well ..... I'm stuck from after that. 🤷🏽*♂️
So the Red wire & the Yellow wire are just sitting their until I can find out exactly what fuses they go to. Like actual fuse numbers that show on the fuse box layout.
So can anyone offer some insight into this???
It would be greatly appreciated. 💆🏽*♂️
Super Member
Joined: Jan 2009
Posts: 929
Likes: 51
From: Silicon Valley, California
Factory ordered 2012 MB C350 w/Dynamic Handling Package
Hmmm...I have my dashcam wired to the overhead map lights. Use a voltmeter to detect which pin is the 12V. As an added benefit, the cam remains on for the duration that the courtesy lights remains hot (I think max 1 hour), OR until the doors get locked after shutting the car down.
This way the cam continues to record in the event the car is valeted.
This way the cam continues to record in the event the car is valeted.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
