T10 EYE LID LED
#1
Junior Member
Thread Starter
Join Date: Mar 2014
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
C350
T10 EYE LID LED
Anyone have good quality T10 eye lid led that doesn't goes bad at some time.
I know the construction of the head light is really poor with the little space, that can't drain the heat of the leds.
My last set didn't lasted for a week. 30 euro's blown.
I have tried several aftermarket T10 leds but they all burn out really fast.. Once I had a a broken led that fell off in eye lid housing rip.
I know the construction of the head light is really poor with the little space, that can't drain the heat of the leds.
My last set didn't lasted for a week. 30 euro's blown.
I have tried several aftermarket T10 leds but they all burn out really fast.. Once I had a a broken led that fell off in eye lid housing rip.
Last edited by aegyo; 10-02-2017 at 08:56 PM.
#2
SPONSOR/MBworld Guru
Our new v5.2a have so far been very successful. It uses the latest CREE XBD chip and has integrated heat shield and gel coat. Single PCB means less solder joints to fail. W204 eye lids are a notoriously bad section due to restricted air flow and two LEDs sitting over hot lows, but our w204 test vehicle has been running this model for over a year with no issues.
http://www.aznoptics.com/index.php?main_page=product_info&cPath=1_4&product s_id=114
http://www.aznoptics.com/index.php?main_page=product_info&cPath=1_4&product s_id=114