Error in ME97 re fuel pressure and charge movement
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Indonesia
Posts: 15
Received 0 Likes
on
0 Posts
W215 CL500 2000
Error in ME97 re fuel pressure and charge movement
Hello,
My car is W204 C230 2008. It has been 2 years i have the following error in module ME97.
2269: The pressure in the fuel low pressure circuit is too high.
0524: The charge movement flap (cylinder bank 1) has a malfunction.
The error can be cleared with SD, but it will appear again.
So far the car running fine, and no symptoms or any engine check light.
I have replaced ME97 module (ECU) and fuel pressure sensor, but the error still there.
Please advise.
Thanks
My car is W204 C230 2008. It has been 2 years i have the following error in module ME97.
2269: The pressure in the fuel low pressure circuit is too high.
0524: The charge movement flap (cylinder bank 1) has a malfunction.
The error can be cleared with SD, but it will appear again.
So far the car running fine, and no symptoms or any engine check light.
I have replaced ME97 module (ECU) and fuel pressure sensor, but the error still there.
Please advise.
Thanks