HnR lowering springs
Thread Starter
Newbie
Joined: May 2026
Posts: 1
Likes: 0
2012 Mercedes c350
HnR lowering springs
I recently installed my rear driver side HnR lowering spring but I’m having issues with bolting back in the sway bar end link. I’m not sure if it’s just one you gotta muscle and push it down so it lines up or if there’s a trick or if I went wrong in the reassembly process
MBWorld Fanatic!
Joined: Aug 2023
Posts: 3,701
Likes: 1,114
From: MA Coast
W204 2010 C300 4matic Sport M272
Do you have both front wheels off the ground?
First time I replaced my front sway bar links I only jacked up that side and with the other wheel still on the ground it made installing the link a pain. Think i had to use another jack to adjust the height of the wheel carrier to align the bolts up.
Jacking the entire front end up from the middle jacking point made it much easier with the second one.
First time I replaced my front sway bar links I only jacked up that side and with the other wheel still on the ground it made installing the link a pain. Think i had to use another jack to adjust the height of the wheel carrier to align the bolts up.
Jacking the entire front end up from the middle jacking point made it much easier with the second one.
