Mercedes Me Start-up Message
#1
Newbie
Thread Starter
Join Date: Jun 2016
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
2016 CLA250 4Matic
Mercedes Me Start-up Message
Hi All. Second post here. I just picked up a new 2019 C and have set up all the Mercedes Me services that I need (i.e Remote start, door unlock, etc). My question is on the MY2019 (not sure if other years have the same issue), when I start the car there’s a “Mercedes Me limited services message on the center console that needs to be closed via the “x” button which can be done via the steering wheel buttons. Is there a way to disable this message or to get the car to start on another “panel”?
TIA!
TIA!
#2
Member
The message is to inform you that a function was performed remotely, in case it wasn’t you. When I lock or unlock my car using mercedes me, I get a similar message. I drive a C400.
Alex
Alex
#3
Newbie
Thread Starter
Join Date: Jun 2016
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
2016 CLA250 4Matic
C
Thanks for the reply. However I am not sure it’s 10”% accurate. I am aware of the messages that infor you of a remote function activated from a phone, web, etc. However, this one shows up when there has been no remote command given and even shows up a minute or two after I start the ignition and start driving.
Last edited by JNGold; 12-07-2018 at 07:42 AM.
#4
Member
C
Thanks for the reply. However I am not sure it’s 10”% accurate. I am aware of the messages that infor you of a remote function activated from a phone, web, etc. However, this one shows up when there has been no remote command given and even shows up a minute or two after I start the ignition and start driving.
Thanks for the reply. However I am not sure it’s 10”% accurate. I am aware of the messages that infor you of a remote function activated from a phone, web, etc. However, this one shows up when there has been no remote command given and even shows up a minute or two after I start the ignition and start driving.