MTV10

Anybody have experience with these?

Recently picked up a 2016 C300 4Matic that I will be using at my dedicated DD / Winter car. Want to get her sitting pretty with some coilovers & spacers. Anybody rolling on the BC Racing Coilovers please share your input.

As far as spacers go I see most people are rolling with :

• 12MM front
• 15MM rear

I'm on the OEM 5 spoke 18'' wheels.

Link to coilovers: https://www.ecstuning.com/b-bc-racin...-kit/j-30~bcr/

MTV10

Coilovers have been installed. Nice quality product with pillow ball top mounts in the front. 30 way damping adjustability front and rear.

Current settings I'm running :

• 25 front
• 22 rear

sixmarch

Are you currently using spacers in that picture?

MTV10

Yes. 12mm front & 16mm rear.

I'm sure I could run a 20mm up front. Rear is sitting perfect.

sixmarch

The car looks great!

GJC400

How's the ride quality after install, compared to stock sport coil springs if possible? I'm assuming that's what the car had before the coilover install.

GringoBling

BC Racing is alright, they are reselling Taiwan-made to spec dampers, it's the same manufacturer as HKS, Blitz, Megan Racing, Fortune Auto, etc, etc. BC Racing customer service is really good tho.

W205_Merc

any updates on the ride quality? squeaks? stiffness? etc

would appreciate it bc im considering this purchase !

MTV10

Ride quality is fantastic. I've been playing around with the damping settings to try and find the best ride for daily driving.

No squeaks, weird spring binding noises or anything of that nature. I have H&R coilovers on my C63 and I've gotta say I find these better.

Rogue-CLK

hey what’s your ride settings at(soft/hard) front rear etc. and did you buy the rear extensions or would you suggest getting them as well? Thanks.

a4ncar

Did you re-use your OEM top mounts or bought new ones? Looks like the BC factory top mounts will not fit and the spring will have to be removed. Thx

j0hn galt

I installed these last years on my c400 and they’re still going strong. Did your set come with any clips from the front brake line?

GringoBling

did you get the front strut issue figured out

j0hn galt

yes, they sent me a different set for the fronts

GringoBling

oh great! I've always had good service from BC

a4ncar

So, it does come with the top strut mount? Anything else that was needed for the install?

j0hn galt

nothing else is needed except a way to mount the front break lines.

phodrew

Hi John - I was thinking about getting these for my c43. how were you able to mount the front break lines?