Hello to all forum members.
I am writing here on behalf of my friend (older man, he is not in computers at all), so I am trying to hlep him with his retrofit.

The Car is C class W205 wagon (S205) C220 diesel 2015. year.
Came by factory without rear parking camera.
Multimedia system is NTG5E
Car has parking sensors by factory.
Friend fitted genuine MB camera A222 905 02 07 and genuine MB motorized camera handle A222 750 08 93

Does anyone here knows what else he needs to complete retrofit?
I mean on hardware.

Thank you in advance

 

Seems the firmware has not be coded... you can contact forum sponsor @BenzNinja USA to get this completed remotely.

 

@CaliBenzDriver maybe I didnt wrote everything. There is no wiring for camera, my question is what is do I need of it, and where to put it and plug it? Is there any schematics?

 

I see... you have a genuine wired camera you want to retrofit. Let's state the obvious: this is not trivial.

You need to connect the genuine camera to the car with a missing harness.

You're going to need the WIS schematic by VIN to create yourself a custom harness with/without proper connectors.

[Power + CAN] connections won't do anything much.
The new function will need to be coded to control the camera.

You need...:
Hardware: camera harness
Software: enabled chassis functions

That's all this is about... built piece by piece.

 

Update on this;
Friend got wiring from scrapyard but it is from limousine (not wagon).

He connected all the jacks on camera side, but he has no clue where to plug other jacks?

Is there any chance that someone on the forum has picures of the wiring plugged in corresponding places?
🙏🙏🙏