Android auto stopped working
Junior Member
Joined: Apr 2025
Posts: 26
Likes: 1
Has It stopped working completely even after you reboot the MBUX system or shutdown and start the engine?
My apple carplay sometimes get disconnected suddenly or doesn’t connect when I start the car. I just reboot the MBUX (by holding down the power button until the screen turns black) and it will usually reconnect.
My apple carplay sometimes get disconnected suddenly or doesn’t connect when I start the car. I just reboot the MBUX (by holding down the power button until the screen turns black) and it will usually reconnect.
Thread Starter
Junior Member
Joined: Oct 2022
Posts: 27
Likes: 1
C200 avantgarde
Has It stopped working completely even after you reboot the MBUX system or shutdown and start the engine?
My apple carplay sometimes get disconnected suddenly or doesn’t connect when I start the car. I just reboot the MBUX (by holding down the power button until the screen turns black) and it will usually reconnect.
My apple carplay sometimes get disconnected suddenly or doesn’t connect when I start the car. I just reboot the MBUX (by holding down the power button until the screen turns black) and it will usually reconnect.
Senior Member
Joined: Jun 2022
Posts: 376
Likes: 115
From: SFV
2025 C300
Thread Starter
Junior Member
Joined: Oct 2022
Posts: 27
Likes: 1
C200 avantgarde
Thread Starter
Junior Member
Joined: Oct 2022
Posts: 27
Likes: 1
C200 avantgarde
I asked chat gpt and says that i need to debug it but the options that gives does not exist, also say something about license issues.
Trending Topics
Senior Member
Joined: Jun 2022
Posts: 376
Likes: 115
From: SFV
2025 C300
Debug is only activated through XENTRY, MB's proprietary software which they use for all aspects of the vehicle. Your MBUX version seems up to date however there are software updates for other aspects of the system not delivered over the air and only installed through an OBD connection in XENTRY. If the issue persists, I would definitely take it to the dealer and have them fix it under warranty. It may also be helpful to ask them directly to connect to XENTRY and update all systems. Sometimes for warranty work they would rather replace the entire computer...
MB World Stories
The Best of Mercedes & AMG
New Electric Mercedes-AMG GT 4-Door Coupe Unveiled: 10 Things You Need to Know
Verdad Gallardo
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Member
Joined: Jul 2010
Posts: 82
Likes: 6
2011 C250
Mbux will reset itself intermittently. This will reset some presets. Most of the time, it will default user profile and fingerprint, drive mode, stop/start, seat and mirrors (parking and reverse mode). But not all at the same time. It is annoying.
When this happens, connected device needs to be deleted and go through the reconnection setup again.
I have also discovered if you send car for service, when the tech push button to turn on accessories and then turn off before system can boot properly, it will reset to defaults.
If start engine and turn off, some settings will default.
If start engine and try to activate sunroof immediately, it will hang the roof opening function until car is stopped and locked overnight before it will accept touch input again.
When this happens, connected device needs to be deleted and go through the reconnection setup again.
I have also discovered if you send car for service, when the tech push button to turn on accessories and then turn off before system can boot properly, it will reset to defaults.
If start engine and turn off, some settings will default.
If start engine and try to activate sunroof immediately, it will hang the roof opening function until car is stopped and locked overnight before it will accept touch input again.
