VIC!!!!! YOUR HREs ARE HERE
#1
Super Member
Thread Starter
VIC!!!!! YOUR HREs ARE HERE
For me....thanks again man....
Rob at Vivid and Lon at HRE - Thank you! They are sick. Will get pictures up next week after we put them on.
http://www.flickr.com/photos/cerfboy/7373615772/http://www.flickr.com/photos/cerfboy/7373615772/ by http://www.flickr.com/people/cerfboy/, on Flickr
Rob at Vivid and Lon at HRE - Thank you! They are sick. Will get pictures up next week after we put them on.
http://www.flickr.com/photos/cerfboy/7373615772/http://www.flickr.com/photos/cerfboy/7373615772/ by http://www.flickr.com/people/cerfboy/, on Flickr
#3
Super Member
Thread Starter
Thank you man...this is the final touch on the outside. Trying very hard to be patient cause the install is going to have to wait until next week. I still can't over how its driving after we put the KW coil overs on too. So happy!
#5
Super Member
How low do you have the kw set, I have them at the lowest on my e63 and not really happy with the stiffness. I am going to raise it about .5 inch and see how it feels
#6
Super Member
And just when we all thought your car couldn't be any sicker,,, you go and throw some bada** wheels on it....lol, Going to look ridiculous, can't wait to see the pics.
#7
Super Member
Thread Starter
Thank man...we have a lot in store for this car on the inside next....
Trending Topics
#10
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,660
Received 3,400 Likes
on
2,845 Posts
2012 CLS63
NA-NICE!!!!!
#11
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 796 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
LOL- give me my wheels back!!!!!!!!
They should weigh about 21-22 lbs each if they are 20x9 and 20x11.
I do believe the net gain with tires on is about 6 lbs of unsprung weight at each corner or 25lbs total. Thats like removing 100 lbs of sprung weight from the car (4x's factor)...
Enjoy Jason- you are mod crazy. What tires are you using?
They should weigh about 21-22 lbs each if they are 20x9 and 20x11.
I do believe the net gain with tires on is about 6 lbs of unsprung weight at each corner or 25lbs total. Thats like removing 100 lbs of sprung weight from the car (4x's factor)...
Enjoy Jason- you are mod crazy. What tires are you using?
#14
Super Member
Thread Starter
#15
Come by and check out our 60,000 sq ft factory Where everyone is employed by HRE and we do it all in-house.
Come find me, I'll show you around.
Here's video to hold you guys over.
www.vimeo.com/36386945
#16
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 796 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
Sure is!
Come by and check out our 60,000 sq ft factory Where everyone is employed by HRE and we do it all in-house.
Come find me, I'll show you around.
Here's video to hold you guys over.
www.vimeo.com/36386945
Come by and check out our 60,000 sq ft factory Where everyone is employed by HRE and we do it all in-house.
Come find me, I'll show you around.
Here's video to hold you guys over.
www.vimeo.com/36386945
Jason, what tires!!!!!! Cause I dont want you to rub...
Last edited by Vic55; 06-15-2012 at 12:38 PM.
#17
Member
Sure is!
Come by and check out our 60,000 sq ft factory Where everyone is employed by HRE and we do it all in-house.
Come find me, I'll show you around.
Here's video to hold you guys over.
www.vimeo.com/36386945
Come by and check out our 60,000 sq ft factory Where everyone is employed by HRE and we do it all in-house.
Come find me, I'll show you around.
Here's video to hold you guys over.
www.vimeo.com/36386945
#18
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,660
Received 3,400 Likes
on
2,845 Posts
2012 CLS63
Sure is!
Come by and check out our 60,000 sq ft factory Where everyone is employed by HRE and we do it all in-house.
Come find me, I'll show you around.
Here's video to hold you guys over.
www.vimeo.com/36386945
Come by and check out our 60,000 sq ft factory Where everyone is employed by HRE and we do it all in-house.
Come find me, I'll show you around.
Here's video to hold you guys over.
www.vimeo.com/36386945
and the artists!!!!! fookin' hell!!
thanx for the share
#21
Super Member
Thread Starter
LOL- give me my wheels back!!!!!!!!
They should weigh about 21-22 lbs each if they are 20x9 and 20x11.
I do believe the net gain with tires on is about 6 lbs of unsprung weight at each corner or 25lbs total. Thats like removing 100 lbs of sprung weight from the car (4x's factor)...
Enjoy Jason- you are mod crazy. What tires are you using?
They should weigh about 21-22 lbs each if they are 20x9 and 20x11.
I do believe the net gain with tires on is about 6 lbs of unsprung weight at each corner or 25lbs total. Thats like removing 100 lbs of sprung weight from the car (4x's factor)...
Enjoy Jason- you are mod crazy. What tires are you using?
I'm keeping my 19s which will either become my track wheels or a new coffee table and end tables for my office. Dead serious but if they end of up the track I'm just not sure. One the HREs I think I am going with the Michelins but am open for advice. One mod I love right now are the new bra bus paddles...now I know why they cost so much. The action and size are amazing.
You and Saedd totally got me started..first it was to look good but now its all about track performace and the more and more people that tell me not to waste my time with a CLS the better....already talking with some drifting instructors...
In other words I turned 41 last week and this is my mid-life....
#22
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 796 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
Miss this one...
I'm keeping my 19s which will either become my track wheels or a new coffee table and end tables for my office. Dead serious but if they end of up the track I'm just not sure. One the HREs I think I am going with the Michelins but am open for advice. One mod I love right now are the new bra bus paddles...now I know why they cost so much. The action and size are amazing.
You and Saedd totally got me started..first it was to look good but now its all about track performace and the more and more people that tell me not to waste my time with a CLS the better....already talking with some drifting instructors...
In other words I turned 41 last week and this is my mid-life....
I'm keeping my 19s which will either become my track wheels or a new coffee table and end tables for my office. Dead serious but if they end of up the track I'm just not sure. One the HREs I think I am going with the Michelins but am open for advice. One mod I love right now are the new bra bus paddles...now I know why they cost so much. The action and size are amazing.
You and Saedd totally got me started..first it was to look good but now its all about track performace and the more and more people that tell me not to waste my time with a CLS the better....already talking with some drifting instructors...
In other words I turned 41 last week and this is my mid-life....
what tires are you using on the HRE's???
#24
Super Member
Thread Starter
I know I babble but I did address this:
the HREs I think I am going with the Michelins but am open for advice.
When I say I am open for advice I mean you tell me....
HRE tires will be more for the street and quick blasts...you know the drill. I just really want them to stick but at the same time don't want to deal with any rubbing.
THoughts?
the HREs I think I am going with the Michelins but am open for advice.
When I say I am open for advice I mean you tell me....
HRE tires will be more for the street and quick blasts...you know the drill. I just really want them to stick but at the same time don't want to deal with any rubbing.
THoughts?
#25
Super Member
Thread Starter
I love these paddles......