AMS/ALPHA Performance M157 Upgraded Turbos - 787WHP!
#1
Former Vendor of MBWorld
Thread Starter
AMS/ALPHA Performance M157 Upgraded Turbos - 787WHP!
A while back we announced our entry into the Mercedes market along side of our shops new E63 AMG Outside of our stock ECU Tune we have remained relatively quiet while we worked diligently behind the scenes on new hardware and power options for the M157 engine.
Introduction thread: https://mbworld.org/forums/w212-amg/...roduction.html
ECU tuning thread: https://mbworld.org/forums/w212-amg/...-platform.html
Today we made a big step in our M157 development. Over the past three months we have been testing and testing our shop E63 with our new upgraded turbos. While you will find below that the Horsepower number is very impressive what is even more impressive is that this is only the beginning as ALL OTHER PARTS ON THE CAR ARE 100% STOCK! You heard that right, no downpipes, no turbo outlet pipes, no exhaust... nothing. This is just a stock E63 with our upgraded turbos calibrated in house by our two tuners Martin Musial and Chris Black.
Please note torque is not shown as our tach pickup was having a hard time picking up a signal on the dyno. Based on the HP Torque should be close to 770 ft lbs.
This is just the start as we are far from done. These turbos should be the cornerstone of what will be our ALPHA 9 Performance package for the M157 motor.
Stay tuned for more information.
Eric
Introduction thread: https://mbworld.org/forums/w212-amg/...roduction.html
ECU tuning thread: https://mbworld.org/forums/w212-amg/...-platform.html
Today we made a big step in our M157 development. Over the past three months we have been testing and testing our shop E63 with our new upgraded turbos. While you will find below that the Horsepower number is very impressive what is even more impressive is that this is only the beginning as ALL OTHER PARTS ON THE CAR ARE 100% STOCK! You heard that right, no downpipes, no turbo outlet pipes, no exhaust... nothing. This is just a stock E63 with our upgraded turbos calibrated in house by our two tuners Martin Musial and Chris Black.
Please note torque is not shown as our tach pickup was having a hard time picking up a signal on the dyno. Based on the HP Torque should be close to 770 ft lbs.
This is just the start as we are far from done. These turbos should be the cornerstone of what will be our ALPHA 9 Performance package for the M157 motor.
Stay tuned for more information.
Eric
#3
Former Vendor of MBWorld
Thread Starter
Thanks! Currently this is on 100 octane but once we get the package totally engineered we will have 91, 93 and race gas tunes available for our customers.
Eric
Eric
Last edited by AMS_Performance; 02-19-2013 at 04:00 PM.
#6
Former Vendor of MBWorld
Thread Starter
It should be on the market fairly soon. We are still fine tuning our full package and we want it to be 100% polished before we release it t the public This was juts a taste.
Eric
Eric
Trending Topics
#8
Former Vendor of MBWorld
Thread Starter
Right now I cant talk about pricing as I want to have it 100% first. The turbos will include a tune and we are still locking that in. We want to offer a 91 and 93 octane map for users as clearly most people don't want to run race gas all the time. Also we are installing some downpipes on the car as most people will be running those in conjunction with the turbos so an different tune will be needed.
Eric
Eric