2012 CLS 550 4matic

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Jan 8, 2022 | 07:14 AM

fgxmfmq

Thread Starter

Junior Member

Joined: Sep 2005

Posts: 29

Likes: 0

2012 CLS 550 4matic

After an oil change, I was advised that I have a drivers side leak out of the valve cover and both timing covers.

Apparently there is no gasket for this and it’s done with a sealer. What should I anticipate for a repair of this nature and any recommendations for repair in Atlanta GA?

is the valve cover a DIY repair?

any information would greatly be appreciated!

Jan 9, 2022 | 08:39 AM

TooManyIDs

Junior Member

Joined: Sep 2015

Posts: 33

Likes: 10

From: New Bern, NC

2020 AMG E63S 4Matic+

Over $3k from my MB dealer.

Jan 9, 2022 | 08:48 AM

chassis

Out Of Control!!

Joined: Sep 2018

Posts: 14,694

Likes: 4,584

From: unbegrenzt

2017 GLE350 4MATIC

Quote:

Originally Posted by fgxmfmq

In principle it is a DIY job. And it’s tricky. Thin bead of sealant that needs to be applied just right on a cleaned surface after considerable disassembly of parts to be able to apply said sealant. Risk of breaking 10 yr old brittle plastic parts during disassembly and reassembly. Single use aluminum screws with very low torque spec.

No rocket science involved but a high level of attention to detail is needed.