Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
One of my previous customers that had me vinyl wrap the roof on his 335i E92 sold his car and got a new car. He purchased the new limited edition matte black C63 coupe from Mercedes. Everything looked good on the car, except for the chrome window trim that blatantly stood out, especially against the matte black paint on the rest of the car. It's not often that I get a matte black car that comes in to have their window trim vinyl wrapped. He decided to go with gloss black for the window trim, to give it some contrast still, and I think it turned out great.
Before:
After:
-Don
donathon@gmail.com
Before:
After:
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I'll try and change things up a bit here. Here's a silver Honda Civic that came by to get his roof wrapped in my matte black vinyl material versus gloss black which most people usually go with. This will help others who have a silver car or a glass sunroof and want to see what a matte black vinyled roof would look like on their car and how it contrasts, etc. The owner of this car was from Irvine/Orange County as well.
Before:
After:
Blacked out the chrome trunk handle piece on the rear:
-Don
donathon@gmail.com
Before:
After:
Blacked out the chrome trunk handle piece on the rear:
-Don
donathon@gmail.com
Newbie
Joined: Jul 2009
Posts: 8
Likes: 0
From: Florida
C36 AMG, E55 AMG 00, SLK320 01, E300TD 99, C43 AMG 98
Hello,
I have w202 c43 pure white, I did my mirrors and door pillars in 3M Di-Noc Glossy 1080 CF and I was thinking to do the same wrap for the roof.
1. What would you recommend for the roof, black gloss? I think it looks very nice on white cars.
2. I have black and white seats black interior (very nice combination) did my door wood trims and next dash upper wood trim in 3M Di-Noc white CF and now would like to wrap my center console (shifter wood ash tray and radio climate control wood trim) what would you recommend 3M Di-Noc Glossy 1080 CF or 3M DI-Noc matte or is there some other CF vinyl wrap that you have and would recommend for my black interior and black and white leather seats.
Do you have web site or how can I see the material pricing you have, I will need to have it shipped.
I have w202 c43 pure white, I did my mirrors and door pillars in 3M Di-Noc Glossy 1080 CF and I was thinking to do the same wrap for the roof.
1. What would you recommend for the roof, black gloss? I think it looks very nice on white cars.
2. I have black and white seats black interior (very nice combination) did my door wood trims and next dash upper wood trim in 3M Di-Noc white CF and now would like to wrap my center console (shifter wood ash tray and radio climate control wood trim) what would you recommend 3M Di-Noc Glossy 1080 CF or 3M DI-Noc matte or is there some other CF vinyl wrap that you have and would recommend for my black interior and black and white leather seats.
Do you have web site or how can I see the material pricing you have, I will need to have it shipped.
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I would go with gloss black.
I personally only use black cf for both the matte and gloss finishes. I don't like the way the other colors look like in the carbon fiber material.
PM me for prices based on how much material you need.
-Don
I personally only use black cf for both the matte and gloss finishes. I don't like the way the other colors look like in the carbon fiber material.
PM me for prices based on how much material you need.
-Don
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Trying to gauge if there is any interest in this flat black vinyl finish. I haven't posted pictures of this finish/material before, but I recently had a someone ask if I had something that was flatter than my matte black vinyl material. So, who's interested? 
Flat black is on the left and matte black is on the right:
-Don
donathon@gmail.com
Flat black is on the left and matte black is on the right:
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I've been running a special on the 3M Di-noc matte carbon fiber vinyl wraps and the owner of this silver ISF drove up from San Diego to me in Orange County to have it done. This is the matte carbon fiber finish. I wrapped both his roof and his side door pillars with the 3M di noc material. I thought it looked great against the silver paint/color of the car. The cf pattern really gave this ISF a more aggressive presence. It also matched the darker wheels fairly well also.
Before:
After:
-Don
donathon@gmail.com
Before:
After:
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Nothing fancy this time around. I vinyl wrapped the trunk handle, which was the last piece of chrome that was on this sapphire black 550 GT. The owner of this car was in Irvine as well. This will help out those who've asked me what my gloss black vinyl material looks like against metallic black paint/finishes. There's still a slight contrast to it, which I think is cool, so it still accents the trim pieces on the car a bit versus just blending in completely.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Even though I mainly specialize in European cars, interestingly enough, I have still had quite a few of these new Kia Optimas come by to get work done on their cars. I had this customer e-mail me to see if I could vinyl wrap the roof of his white Kia Optima with my gloss black vinyl material to give the roof that panoramic roof look/effect. Even though the roof of this car protruded outwards in the middle, unlike most cars, I was still able to wrap the roof without any issues.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I vinyl wrapped the roof of this brand new white Mercedes-benz C250 with my gloss black vinyl material. The owner of this car was from around the Los Angeles/Torrance area and drove out to me in Orange County to have his roof done. It's always fun seeing new car models/face lifts come out and come by to get some vinyl work done.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Did this one probably a year ago, but just realized that I never posted pictures of it. It is a black G37 sedan that I vinyl wrapped the roof in the 3M Di-noc matte carbon fiber finish. It's not often that I get black cars coming by to get their roofs wrapped, so this is good for those out there who have darker colored cars or black cars to get an idea of how the carbon fiber would look on your roofs. It gives it a nice contrast. From far away it looks flat-ish, but once you get up closer, you start seeing the design and carbon fiber weave pattern. The owner of this car was from around south Orange County I believe.
Remember, I am having a discounted special on all 3M dinoc carbon fiber installs right now as well. So hit me up if you're interested. Now's a good time to get it done.
-Dom
donathon@gmail.com
Remember, I am having a discounted special on all 3M dinoc carbon fiber installs right now as well. So hit me up if you're interested. Now's a good time to get it done.
-Dom
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this silver Corvette contacted me to see if I could vinyl wrap his T-top and roll hoop with my matte black vinyl material/finish. I don't get too many domestic cars coming by to get vinyl work done, so this was a nice change of pace. I personally think that the matte black top gave this car a clean look but also a more aggressive stance at the same time. Almost even made the car look longer, because the black was continuous from the front of the windshield to the back of the trunk/rear window now. The owner of this car was around south Orange County and came over to me to have the vinyl work done.
Before:
After:
-Don
Donathon@gmail.com
Before:
After:
-Don
Donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here is a silver TL type S that came by to have me vinyl wrap the roof of his car with my gloss black vinyl material. He drove out from around the Inland Empire/Riverside area to me in Orange County to have it done. I really liked the way the roof turned out/looked on this car. A gloss black roof on a silver car gives the car a very clean, simple, and elegant look.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I have people always asking me how well my material holds up over time and how long does it last. Well, here is a black MkV VW GTI that I did roughly 2 - 2.5 years ago. I vinyl wrapped the center section of his grill in my matte black vinyl material. This is as exposed to road debris and wear and tear as any wrap is going to get, being on the front of the bumper. There are some nicks here and there from sharp rock chips/hits, but nothing out of the ordinary that you wouldn't expect to see on a car's front bumper that's been daily driven for the last couple of years.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This white Lexus IS350 dropped by to have me vinyl wrap the roof of his car with my gloss black material. Hopefully these pictures will help out those who have carbon fiber hoods see how the gloss black vinyl roof matches/looks with a carbon hood. I thought that the gloss black vinyl roof complimented the carbon fiber hood and other carbon fiber/black accents on the car fairly well. The owner of this car was from around Cerritos and came out to me in Anaheim Hills/Orange County to have the work done.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I had this new white Mercedes Benz C class coupe come by to have me wrap his chrome/brushed aluminum window trim in my gloss black vinyl material. He wanted to go with the gloss black to match the glass panoramic roof and to also match the B pillars on the door, which were also gloss black already from the factory. I should have taken the after pictures of it outside so you guys can get a better view/look, but for some reason this time I took the pictures of the car inside. The owner of this car was from around Buena Park and drove out to me in Anaheim Hills/Orange County to get the work done. I have a lot of guys ask me if they should go with matte or gloss black on their window trims, so hopefully this will help those of you out trying to figure what to go with.
Before
After
-Don
donathon@gmail.com
Before
After
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I vinyl wrapped both the roof of this car and his window trim in my gloss black vinyl material. However, I am just going to post pictures of the roof done for now. I'll post pictures of the gloss black vinyl wrapped window trim that I also did on this car later. You can still sort of make out the gloss black window trim in the pictures, for those who were considering on doing both and weren't sure which finish to go with on the window trim with their gloss black vinyl'd roofs.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This time around, I went with a lighter shade than the usual shade that I have used in the past for when I tinted/smoked head lights/tail lights. I chose this shade to closer match a tint/shade that you would expect to see as a dealer or factory option. I basically would describe this as an OEM+ look. For those who are familiar, it's similar to the blackline tail lights that BMW offers or the Porsche tail lights that come from the factory with the clear portion tinted/smoked already. Hopefully you guys will be able to get a good idea of how this shade looks like on these tail lights from the pictures that I took. Let me know if you guys want any specific angles or more pictures and I'll see what I can do.
Left factory - Right tinted
Both tinted/smoked
Tinted/smoked - after
Tinted/smoked - before
-Don
donathon@gmail.com
Left factory - Right tinted
Both tinted/smoked
Tinted/smoked - after
Tinted/smoked - before
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here are some pictures of a new black BMW F10 5 series that I vinyl'd the chrome window trim with my matte black material to resemble the BMW factory shadowline trim look. I had some people ask for some closer up pictures of the wrap around the edges, so here they are. Let me know if you guys have any questions or other picture requests.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I had some requests for some more eye level angles, so I mixed those in with some of the higher angle ones to help you guys better visualize what it looks like. I usually get a lot of white and black cars coming by to get vinyl work done, so it's always different when other colored cars come by to get some vinyl work done. I think this is probably the second or third yellow car that I have had come by. The owner of this car was from around Cerritos and came out to me in Anaheim Hills to get the vinyl work done. We went with the gloss black to match the lips/finish on the wheels.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
How much of a difference does blacking out your chrome window trim make?
This much of a difference.
After:
-Don
donathon@gmail.com
This much of a difference.
After:
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is not a car that I personally worked on. This car belongs to one of my customers that installed the vinyl wrap himself for his roof. I asked him for these pictures, because this is the flat black material, which is not to be confused with the matte black that you see in all of my other pictures. I've had this flat black material for a while now, but I never had requests for it, so I never got around to using it myself.
I don't have many pictures of it, but hopefully these will be enough to sort of give you guys an idea of how it looks like on a car.
-Don
donathon@gmail.com
I don't have many pictures of it, but hopefully these will be enough to sort of give you guys an idea of how it looks like on a car.
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here is a black BMW E90 335i that I vinyl wrapped the roof with the 3M di-noc carbon fiber material. The owner of this car was from around the LA area and drove out to me in Orange County to have the vinyl work done. I had also vinyl wrapped his window trim in matte black a while back as well. It's not very noticeable in the pictures, but the mirror caps were real carbon fiber, as a reference point for how the vinyl compares to real carbon.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
