Dyno Mode
1. turn key to 3rd position(right before car starts)
2. make sure the middle screen is set to Farenheit
3. turn key to first position(off position), do not take key out
4. turn key to the second position
5. hit reset button 3 times and that secret menu comes up
6. scroll through the menu till you see dynometer, turn it on then start the car
1. turn key to 3rd position(right before car starts)
2. make sure the middle screen is set to Farenheit
3. turn key to first position(off position), do not take key out
4. turn key to the second position
5. hit reset button 3 times and that secret menu comes up
6. scroll through the menu till you see dynometer, turn it on then start the car
but to be honest, it is almost as ( ESP off ).
To access "Dynomode", please follow the following instructions and tips.
- before turning off ignition, navigate to the "mileage screen" (make sure any errors are reset)
- turn off key and close door
- do not touch any pedals or buttons other than descibed next
- put key in ignition
- turn to position1
- press and hold "answer" followed by "ok" in fast succession
- a new menu will appear on screen use left "Up & Down" arrows to navigate to "Dynomode"
- press "Ok" to enable
- turn on ignition
Trending Topics
The Best of Mercedes & AMG
Last edited by Mr. Happy; Sep 11, 2012 at 07:13 AM.



