Variant coding issues ""Help!"
Thread Starter
Junior Member
Joined: Mar 2019
Posts: 22
Likes: 1
CLS 55
Variant coding issues ""Help!"
Hey everyone. I have recently jammed myself up. So I recently installed headers on my cls55 and decided that I would attempt to turn off the CEL for the rear o2 sensor that no longer existed. I've heard of people doing this with Xentry however I currently do not have access to that system. I do however own an auto scanner that can perform variant coding. I was able to shut this feature off however upon doing so it has caused an issue with communication to the ECU. Thus I have a ABS light and and ESP malfunction. I've tried to revert the setting however the ECU and other modules are not happy. If anyone could point me in the right direction about this that would be greatly appreciated. The following are the stored codes.
ESP code: 4A30 Engine control module not identified or incorrect control module
System diagnosis (CAN) 930E synchronization of the DTC memory cannot be ensured
Thanks in advance!
ESP code: 4A30 Engine control module not identified or incorrect control module
System diagnosis (CAN) 930E synchronization of the DTC memory cannot be ensured
Thanks in advance!
Hey everyone. I have recently jammed myself up. So I recently installed headers on my cls55 and decided that I would attempt to turn off the CEL for the rear o2 sensor that no longer existed. I've heard of people doing this with Xentry however I currently do not have access to that system. I do however own an auto scanner that can perform variant coding. I was able to shut this feature off however upon doing so it has caused an issue with communication to the ECU. Thus I have a ABS light and and ESP malfunction. I've tried to revert the setting however the ECU and other modules are not happy. If anyone could point me in the right direction about this that would be greatly appreciated. The following are the stored codes.
ESP code: 4A30 Engine control module not identified or incorrect control module
System diagnosis (CAN) 930E synchronization of the DTC memory cannot be ensured
Thanks in advance!
ESP code: 4A30 Engine control module not identified or incorrect control module
System diagnosis (CAN) 930E synchronization of the DTC memory cannot be ensured
Thanks in advance!
First thing to check is if it's just bugging due to the poor quality of those aftermarket tools
so take the battery off 20 min then delete all faults
if that doesn't work means that your scan"thing" messed up your coding
two solutions
A Xentry system:
Unless you know your original coding strings,
A at the dealer, they will recode your car to stock
B a professional coder like what we offer that have access to your original coding or rebuild it from scratch
This happens a lot. be aware that there is NOTHING aftermarket that will code a MB properly 100% of the time.
not even $3500+ Autel
Thread Starter
Junior Member
Joined: Mar 2019
Posts: 22
Likes: 1
CLS 55
So
First thing to check is if it's just bugging due to the poor quality of those aftermarket tools
so take the battery off 20 min then delete all faults
if that doesn't work means that your scan"thing" messed up your coding
two solutions
A Xentry system:
Unless you know your original coding strings,
A at the dealer, they will recode your car to stock
B a professional coder like what we offer that have access to your original coding or rebuild it from scratch
This happens a lot. be aware that there is NOTHING aftermarket that will code a MB properly 100% of the time.
not even $3500+ Autel
First thing to check is if it's just bugging due to the poor quality of those aftermarket tools
so take the battery off 20 min then delete all faults
if that doesn't work means that your scan"thing" messed up your coding
two solutions
A Xentry system:
Unless you know your original coding strings,
A at the dealer, they will recode your car to stock
B a professional coder like what we offer that have access to your original coding or rebuild it from scratch
This happens a lot. be aware that there is NOTHING aftermarket that will code a MB properly 100% of the time.
not even $3500+ Autel
Thanks. I will give that a shot today. I was actually using A fairly high end autel scanner to perform the task. I have used this function before to perform coding tasks on different vehicles and have hadh no issues however that is not the case this time. Is there any way to figure out the factory coding string? I am able to imput it as sting with my tool but of course i dont have that info. Also what do you charge to rebuild from scratch and what is the process? Will I need to send in my ecu in or can this be done remotly?remotely? Thanks for the help.
That service is only for BenzNinja members sorry
just go to the dealer and ask them to code your ecu back if the battery trick didn't help
Thread Starter
Junior Member
Joined: Mar 2019
Posts: 22
Likes: 1
CLS 55
There are some things I would like to code out also So i will be back in the same boat as before I messed it up. Can you send me info on how to become a member or is this service geared more for Dealers and repair shops? Is it more cost effective to go to the dealer?
Hi
all info is here and also the forms to ask pricing
www.benzninja.com
for members, all repairs a free lifetime
Thread Starter
Junior Member
Joined: Mar 2019
Posts: 22
Likes: 1
CLS 55
Hi
all info is here and also the forms to ask pricing
www.benzninja.com
for members, all repairs a free lifetime
all info is here and also the forms to ask pricing
www.benzninja.com
for members, all repairs a free lifetime
Trending Topics
Newbie
Joined: Nov 2024
Posts: 2
Likes: 0
Lost my coding strings
How can i get in contact with you to recode my car to stock, tried to recode a dashcam after a windshield replacement and the scanner turned it into a gle 350..
All the features have been erased from the quick access page on mbux
please help with this
All the features have been erased from the quick access page on mbux
please help with this
So
First thing to check is if it's just bugging due to the poor quality of those aftermarket tools
so take the battery off 20 min then delete all faults
if that doesn't work means that your scan"thing" messed up your coding
two solutions
A Xentry system:
Unless you know your original coding strings,
A at the dealer, they will recode your car to stock
B a professional coder like what we offer that have access to your original coding or rebuild it from scratch
This happens a lot. be aware that there is NOTHING aftermarket that will code a MB properly 100% of the time.
not even $3500+ Autel
First thing to check is if it's just bugging due to the poor quality of those aftermarket tools
so take the battery off 20 min then delete all faults
if that doesn't work means that your scan"thing" messed up your coding
two solutions
A Xentry system:
Unless you know your original coding strings,
A at the dealer, they will recode your car to stock
B a professional coder like what we offer that have access to your original coding or rebuild it from scratch
This happens a lot. be aware that there is NOTHING aftermarket that will code a MB properly 100% of the time.
not even $3500+ Autel
MB World Stories
The Best of Mercedes & AMG
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Mercedes Teases Updated EQS With Steer-By-Wire and a Yoke
Verdad Gallardo
8 Mercedes Models With Poor Reliability Records
Verdad Gallardo
Magnificent New Mercedes-Maybach S-Class Revealed: 12 Things to Know
Verdad Gallardo
MBWorld Fanatic!
Joined: Jun 2020
Posts: 1,177
Likes: 314
2006 CLS55 AMG, 2005 SLK 350 AMG
In post #6 he provides his web site.
Newbie
Joined: Jan 2024
Posts: 2
Likes: 0
w219 cls55
Thanks. I will give that a shot today. I was actually using A fairly high end autel scanner to perform the task. I have used this function before to perform coding tasks on different vehicles and have hadh no issues however that is not the case this time. Is there any way to figure out the factory coding string? I am able to imput it as sting with my tool but of course i dont have that info. Also what do you charge to rebuild from scratch and what is the process? Will I need to send in my ecu in or can this be done remotly?remotely? Thanks for the help.
