PIC of ss pipe from Evo
1. It is T304 stainless and cut to exactly the right lenght needed to replace stock resonator. Very few muffler shops stock stainless pipe. You can find stainless pipe in industrial supply shops, but you have to buy 20 feet at at time. Now one can allways use aluminized steel, but after several months it will start to rust out.
2. The pipe is expanded on both sides to slide over stock exhaust. This makes for simple and good looking installation. You will suprised and how many bad weld jobs we have seen over the years. Crooked pipes and ugly welds is what one usually gets at a local muffler pit.
I would like to do this mod, but am a little hesitant that I may not like the result, and would prefer a back up it it doesn't work out.
The Best of Mercedes & AMG
Also, how much HP will you gain if any with this mod?
Also, how much HP will you gain if any with this mod?
This mod will not gain any hp. Just makes the exhaust note a bit deeper.
Okay, now that we cleared that up, I finally thinks it's safe to say





