Evosport Phenolic Spacers
Thread Starter
Junior Member
Joined: Apr 2007
Posts: 17
Likes: 0
From: Brisbane, Australia
2016 C63S Coupe
Evosport Phenolic Spacers
Hi all,
i Recently received the phenolic spacers here in australia and wanted to find out something.
The spacers have a gritty black material on them, i assume a by-product of the production stamping. Is there a proper method to remove this black stuff or will just a wipe with a damp cloth do? Also, are there any tricks to installation that i should tell my mechanic regarding torque of the screws or like.
Thanks for the help inn advance
i Recently received the phenolic spacers here in australia and wanted to find out something.
The spacers have a gritty black material on them, i assume a by-product of the production stamping. Is there a proper method to remove this black stuff or will just a wipe with a damp cloth do? Also, are there any tricks to installation that i should tell my mechanic regarding torque of the screws or like.
Thanks for the help inn advance
Super Member
Joined: Jul 2006
Posts: 925
Likes: 2
From: Maine
Not an AMG :(
....The spacers have a gritty black material on them, i assume a by-product of the production stamping. Is there a proper method to remove this black stuff or will just a wipe with a damp cloth do? Also, are there any tricks to installation that i should tell my mechanic regarding torque of the screws or like.
Aside from that, when you install them, make sure you install new gaskets (should be included) and get some sort of spacers for the screws/studs on the other side of the fuel rail.
There are a couple of great threads on this forum that discuss installation tips, etc....
Here's one started by AMG_Jerry
