Does anyone know if the LET C32 185mm are in stock yet?
04-24-2008, 03:33 PM
#1
Member
Thread Starter
Join Date: Jan 2008
Location: Washington
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
02' C32 - 07' H2 - 07' BMW K1200R
Does anyone know if the LET C32 185mm are in stock yet?
Does anyone know if the LET Motorsports C32 185mm pulleys are stock yet?
I have been calling and emailing Jerry, but the last time I had any luck was a email I got from him on 4/18.
He said in the email that they were coming in on that Friday - and they would be trying to get them all shipped out asap.
I am really excited to get it installed and send the ECU to Jerry for a flash.
Waiting sucks....but I think the 22psi boost will make time zip by a little faster when it is all installed....
Scott
I have been calling and emailing Jerry, but the last time I had any luck was a email I got from him on 4/18.
He said in the email that they were coming in on that Friday - and they would be trying to get them all shipped out asap.
I am really excited to get it installed and send the ECU to Jerry for a flash.
Waiting sucks....but I think the 22psi boost will make time zip by a little faster when it is all installed....
Scott
04-24-2008, 08:06 PM
#3
Member
Thread Starter
Join Date: Jan 2008
Location: Washington
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
02' C32 - 07' H2 - 07' BMW K1200R
Hmmm...they must just be swamped shipping and working on projects. When is it going to be showing up at your door step? 
I think my heat exchanger showed up via UPS. Is that how the pulley is being shipped?
Please let us know how it works out when installed!
Scott
I think my heat exchanger showed up via UPS. Is that how the pulley is being shipped?
Please let us know how it works out when installed!
Scott
04-25-2008, 05:25 PM
#4
Super Member
Join Date: Oct 2002
Location: Atlanta, GA
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
SLK32
Erick & Jerry seemed to be swamped with orders and projects. In the past they have been very responsive but lately they have been slower.
They provide great service and I have purchased a number of items from them in the past and would not hesitate to purchase from them in the future. I highly recommend them to anyone looking to purchase parts/upgrades.
Not sure when it is going to arrive. Probably sometime next week. I will be replacing my ASP pulley with the new LET 185mm pulley.
Last time at the dyno I put down 329hp. Since then I have added a set of cams, ECU tuning, the 185mm Pulley, a custom intake, an LSD, and some misc. mods.
After the install it will be time to hit the dyno.
LET probably does use UPS which is a mistake in my book. I have always had much better service and the same or better prices by using FedEx.
They provide great service and I have purchased a number of items from them in the past and would not hesitate to purchase from them in the future. I highly recommend them to anyone looking to purchase parts/upgrades.
Not sure when it is going to arrive. Probably sometime next week. I will be replacing my ASP pulley with the new LET 185mm pulley.
Last time at the dyno I put down 329hp. Since then I have added a set of cams, ECU tuning, the 185mm Pulley, a custom intake, an LSD, and some misc. mods.
After the install it will be time to hit the dyno.
LET probably does use UPS which is a mistake in my book. I have always had much better service and the same or better prices by using FedEx.
Last edited by 430; 04-25-2008 at 05:28 PM.
Trending Topics
04-25-2008, 09:22 PM
#8
SPONSOR
I'm sooo sorry for not responding sooner.
The 185's and 181's are now in stock and we will be done shipping all orders hopefully on Tuesday.
We had over 35 orders and they are slowly shipping. We split the shipments up from the manuf. because of the last pulleys being damaged during shipment.
Erick is at the hospital now with his wife who is having their second baby.
Please call me this weekend and we discuss.
The 185's and 181's are now in stock and we will be done shipping all orders hopefully on Tuesday.
We had over 35 orders and they are slowly shipping. We split the shipments up from the manuf. because of the last pulleys being damaged during shipment.
Erick is at the hospital now with his wife who is having their second baby.
Please call me this weekend and we discuss.
04-26-2008, 01:18 AM
#10
Does anyone know if the LET Motorsports C32 185mm pulleys are stock yet?
I have been calling and emailing Jerry, but the last time I had any luck was a email I got from him on 4/18.
He said in the email that they were coming in on that Friday - and they would be trying to get them all shipped out asap.
I am really excited to get it installed and send the ECU to Jerry for a flash.
Waiting sucks....but I think the 22psi boost will make time zip by a little faster when it is all installed....
Scott
I have been calling and emailing Jerry, but the last time I had any luck was a email I got from him on 4/18.
He said in the email that they were coming in on that Friday - and they would be trying to get them all shipped out asap.
I am really excited to get it installed and send the ECU to Jerry for a flash.
Waiting sucks....but I think the 22psi boost will make time zip by a little faster when it is all installed....
Scott
04-26-2008, 01:09 PM
#11
Member
Thread Starter
Join Date: Jan 2008
Location: Washington
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
02' C32 - 07' H2 - 07' BMW K1200R
I'm sooo sorry for not responding sooner.
The 185's and 181's are now in stock and we will be done shipping all orders hopefully on Tuesday.
We had over 35 orders and they are slowly shipping. We split the shipments up from the manuf. because of the last pulleys being damaged during shipment.
Erick is at the hospital now with his wife who is having their second baby.
Please call me this weekend and we discuss.
The 185's and 181's are now in stock and we will be done shipping all orders hopefully on Tuesday.
We had over 35 orders and they are slowly shipping. We split the shipments up from the manuf. because of the last pulleys being damaged during shipment.
Erick is at the hospital now with his wife who is having their second baby.
Please call me this weekend and we discuss.
Eric actually called me from the delivery room on Friday and apologized for the delay, he said you were at the doctor's too
Hope you are O.K. I was just afraid that I would miss the UPS man when he showed up - I have been traveling a few days each week
I will try giving you a call this afternoon - thanks again!
04-26-2008, 01:24 PM
#12
Senior Member
Join Date: Oct 2007
Location: utah
Posts: 333
Likes: 0
Received 1 Like
on
1 Post
02 c32 99 superduty
Man with your mods and that new pulley you should be one of the faster c32's out there. I have a smaller Renntech pulley and my car feels stronger every day. I think it takes a little time for our car's to adapt to the added boost.
04-26-2008, 03:38 PM
#13
Member
Thread Starter
Join Date: Jan 2008
Location: Washington
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
02' C32 - 07' H2 - 07' BMW K1200R
LOL...thanks, but it is hard to tell without taking it to a real track.
I don't know squat about "lauching", so I am probably not the guy that could get a good solid run anyway
I did not quite understand all the tech details, but Jerry said that my car would (could?) be "as fast" as his shop C32 with the LET 185mm & "Jerry-Tuned" ECU.
At the time I ordered the pulley, Jerry said that his car is the 2nd fastest in the U.S. (drag strip).
I think he said it could even be a bit quicker w/o his Nitrous turned on?
It had something about his porting & polish...I don't know - hopefully Jerry will chime in and explain all this Go Fast Voo-Doo magic
Point is...I can bolt on stuff all day long, but I need to learn how to use it - and record it at a strip to know for sure...or I am not much better than your average rice crispy snack
Scott
04-26-2008, 04:17 PM
#14
Super Member
Join Date: May 2007
Location: Oakland, California
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
07 E550, 02 C32, 91 300E
04-26-2008, 05:54 PM
#15
Member
Thread Starter
Join Date: Jan 2008
Location: Washington
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
02' C32 - 07' H2 - 07' BMW K1200R
No kidding 
I just about laughed when Erick told me where he was calling from, I though he was joking with me! I think I will start a congrats thread - and spread the word a bit about how cool LET is.
I can honestly say that I have never got a call from a company "owner" as his son is getting ready to be born.
By the way ......it's a BOY!
Congratulations Erick!
(And thanks to Jerry for taking about an hour to explain Nitrous pros / cons & 185mm pulley tech)
I just about laughed when Erick told me where he was calling from, I though he was joking with me! I think I will start a congrats thread - and spread the word a bit about how cool LET is.I can honestly say that I have never got a call from a company "owner" as his son is getting ready to be born.
By the way ......it's a BOY!
Congratulations Erick!
(And thanks to Jerry for taking about an hour to explain Nitrous pros / cons & 185mm pulley tech)
04-30-2008, 10:27 PM
#16
No kidding I just about laughed when Erick told me where he was calling from, I though he was joking with me! I think I will start a congrats thread - and spread the word a bit about how cool LET is.
I can honestly say that I have never got a call from a company "owner" as his son is getting ready to be born.
By the way ......it's a BOY!
Congratulations Erick!
(And thanks to Jerry for taking about an hour to explain Nitrous pros / cons & 185mm pulley tech)
I just about laughed when Erick told me where he was calling from, I though he was joking with me! I think I will start a congrats thread - and spread the word a bit about how cool LET is.I can honestly say that I have never got a call from a company "owner" as his son is getting ready to be born.
By the way ......it's a BOY!
Congratulations Erick!
(And thanks to Jerry for taking about an hour to explain Nitrous pros / cons & 185mm pulley tech)
thanks guys, between the baby coming last weekend and we had a delay on part of our idler pulley order we are getting caught up on all of the shipping in the next couple of days, all the pulleys will be shipping by friday at the latest...
05-01-2008, 04:54 PM
#19
SPONSOR
Join Date: Jul 2007
Location: Houston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
Posts: 5,459
Received 149 Likes
on
109 Posts
Eurocharged Performance ML63 and TT lambo
Hum....I think there wasnt much I didnt get!!!
I pretty much told Jerry I wanna go fast....
He smiled, and said I can help you with that....
phenelic spacers
185 pully set
johnson pump
wires
plugs
tune
heat exchange
so pretty much, most things off the LET page...oh...and the new rims (jerrys old ones) look darn nice...
Should be fun!
I pretty much told Jerry I wanna go fast....
He smiled, and said I can help you with that....
phenelic spacers
185 pully set
johnson pump
wires
plugs
tune
heat exchange
so pretty much, most things off the LET page...oh...and the new rims (jerrys old ones) look darn nice...
Should be fun!
Last edited by loungn14; 05-01-2008 at 08:33 PM.
05-01-2008, 06:02 PM
#20
Member
Thread Starter
Join Date: Jan 2008
Location: Washington
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
02' C32 - 07' H2 - 07' BMW K1200R
You are welcome Erick! Is this your first?
If you get time, can you please email me or give me a call on my cell? You can call anytime - I am up late dreaming of things that go fast
Scott
05-01-2008, 06:41 PM
#22
Member
Thread Starter
Join Date: Jan 2008
Location: Washington
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
02' C32 - 07' H2 - 07' BMW K1200R
Hum....I think there wasnt much I didnt get!!!
I pretty much told Jerry I wanna go fast....
He smiled, and said I can help you with that....
phenelic spacers
185 pully set
johnson pump
wires
plugs
tune
intercooler
so pretty much, most things off the LET page...oh...and the new rims look darn nice...
Should be fun!
I pretty much told Jerry I wanna go fast....
He smiled, and said I can help you with that....
phenelic spacers
185 pully set
johnson pump
wires
plugs
tune
intercooler
so pretty much, most things off the LET page...oh...and the new rims look darn nice...
Should be fun!
You might want to pick up some "Depends" too
.....or just put a real thick towel over your drivers seat. If you are going from mostly stock to all these LET goodies...you might just "soil yer britches" when you nail it the first time after the install. I just about baked a loaf the first time I nailed the pedal to the floor in my 32 and it is only an evosport stage II.
I am going do an Ex lax flush & and eat very carefully a few days before testing out the 185mm & Jerry Tuned ECU!
Great choice of goodies....congrats and have fun!
Godspeed, fly low, fly fast, fly safe....and always watch your 6:00
05-01-2008, 08:32 PM
#23
SPONSOR
Join Date: Jul 2007
Location: Houston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
Posts: 5,459
Received 149 Likes
on
109 Posts
Eurocharged Performance ML63 and TT lambo
You might want to pick up some "Depends" too
.....or just put a real thick towel over your drivers seat. If you are going from mostly stock to all these LET goodies...you might just "soil yer britches" when you nail it the first time after the install. I just about baked a loaf the first time I nailed the pedal to the floor in my 32 and it is only an evosport stage II.
I am going do an Ex lax flush & and eat very carefully a few days before testing out the 185mm & Jerry Tuned ECU!
Great choice of goodies....congrats and have fun!
Godspeed, fly low, fly fast, fly safe....and always watch your 6:00
Thats what Im hoping for! I am running a Jerry-tune right now, and I can seriously feel the difference throught the entire band. I can only imagine a Jerry-tune with the other goodies......
05-01-2008, 08:32 PM
#24
SPONSOR
You guys are awesome!!
05-01-2008, 08:33 PM
#25
SPONSOR
