y splitter hose part number
#1
Member
Thread Starter
Join Date: Feb 2008
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
E63 W211 08, C32 W203 02
![Question](https://mbworld.org/forums/images/icons/icon5.gif)
Hello, my C32 y splitter hose is ripped when i install my new air filter. Does anyone have the correct part number for both side?
Thanks in advance.
Thanks in advance.
#2
Super Member
If so, I'm not sure if they can be ordered separately from the intake pipe (i.e. splitter). I could be wrong though.
How bad is the rip/tear? Can you repair it with a rubber hose repair kit (Autozone, etc. sells those kits).
![](http://gi58.photobucket.com/groups/g261/B0KLYO1N4J/Intake.jpg)
#3
MBWorld Fanatic!
Are you referring to the piping indicated by the red arrows in the image below?
If so, I'm not sure if they can be ordered separately from the intake pipe (i.e. splitter). I could be wrong though.
How bad is the rip/tear? Can you repair it with a rubber hose repair kit (Autozone, etc. sells those kits).
![](http://gi58.photobucket.com/groups/g261/B0KLYO1N4J/Intake.jpg)
If so, I'm not sure if they can be ordered separately from the intake pipe (i.e. splitter). I could be wrong though.
How bad is the rip/tear? Can you repair it with a rubber hose repair kit (Autozone, etc. sells those kits).
![](http://gi58.photobucket.com/groups/g261/B0KLYO1N4J/Intake.jpg)
#4
Super Member
#5
Super Member
gtr886 - if you are still looking for part numbers on the tubes depicted in the image (earlier post), then you may be best served by PM'ing C32used and asking if there are specific numbers on the individual hoses.
He has a stock intake setup out of his car and for sale here. Perhaps he can help you out.
He has a stock intake setup out of his car and for sale here. Perhaps he can help you out.