Pulling Interior Trim
Thread Starter
Super Member
Joined: Nov 2008
Posts: 844
Likes: 1
I DON'T COME HERE ANYMORE
Pulling Interior Trim
Anyone done this before? I picked up some of the CF wrap from GQ Styles-and I'm liking what I've seen so far when people wrap the silver interior trim bits with it-thinking I would give it a shot!
I've got the STAR DVD and how to pull the door panels, ect-but wasnt sure if I needed to pull the whole panel to gain access to the smaller trim pieces (how are they attached-screws from behind? snap in?)-or if they may just "pop off" from the front with a wedge (seems quite a few parts on the doors will)-
will post DYI as I go/completed-any input helps-thanks!
I've got the STAR DVD and how to pull the door panels, ect-but wasnt sure if I needed to pull the whole panel to gain access to the smaller trim pieces (how are they attached-screws from behind? snap in?)-or if they may just "pop off" from the front with a wedge (seems quite a few parts on the doors will)-
will post DYI as I go/completed-any input helps-thanks!
MBWorld Fanatic!
Joined: Jun 2005
Posts: 1,511
Likes: 267
From: Chicago
2025 AMG E 53; 2018 GLC300 4Matic; 2003 360 Modena
The complete door panels must be removed, and then the straight pieces use a tabbed washer over fixed pins attached to the piece. The curved piece by the window switches I believe are secured by screws.
Thread Starter
Super Member
Joined: Nov 2008
Posts: 844
Likes: 1
I DON'T COME HERE ANYMORE
I'm plan on tackling both doors and possibly the center stack this Sat and sunday-I'll def be taking pics and writing something up-I have the STAR DVD and it walks you through it all well and all-but you never know when they tell you to pry part C to remove clip B when you could just reach in back behind the panel and pop it off-
I'll update!
I'll update!
