Re-badge boot and bonnett
Thread Starter
Super Member
Joined: Dec 2007
Posts: 846
Likes: 45
From: ATL
2017 GLS 550
Re-badge boot and bonnett
found some nice nice engraved full color Alfterbach Tree/Valve Train badges and obviously the hood badge is a no brainer, but the Trunk badge comes with 2 screws, haven't had a chance to pull the lining off the trunk lid to see how the Star comes off. are there 2 screws securing it or is it just glued on like the C55 and ///AMG Logos?
Thanks in Advance
Thanks in Advance
Super Member
Joined: Apr 2010
Posts: 754
Likes: 10
From: Houston, TX
a car.
I've removed mine, here's what you want to do.
Pull to top trunk liner completely off.
Look for the three posts coming through from the Mercedes Star.
Lightly and I emphasize lightly tap on them with a hammer or similar tool.
Once it's 90% out go ahead and carefully pull it the rest of the way from the outside.
It's held in securely because there are three plastic grommets holding it there, remove them as well.
Pull to top trunk liner completely off.
Look for the three posts coming through from the Mercedes Star.
Lightly and I emphasize lightly tap on them with a hammer or similar tool.
Once it's 90% out go ahead and carefully pull it the rest of the way from the outside.
It's held in securely because there are three plastic grommets holding it there, remove them as well.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
