400HP with a 75 shot
01-17-2011, 04:52 PM
#1
MBWorld Fanatic!
Thread Starter
400HP with a 75 shot
Saw this over on the CF Forum. Not that I'm saying this is good, Nitrous scares me a bit too much, but I thought it was interesting nonetheless.
75 wet shot nitrous, 400HP SRT-6
Put her car on the rollers today.
Last dyno was 310hp/310tq only mod was nw cai, run was on 90 octane.
Since then took out secondary cats, isolated cooling system, one step coler plugs, plug wires, and put a zex kit on it.
all runs today were made with 108 octane.
first run no nitrous was 306hp/310tq
due to colder plugs and the fuel octane, they created a static timming drop that resulted in no gain from before.
next pass was on a 75 shot 402hp/412tq
we expected 360-370 but due to the cooling effect it had on the charge we broke the 400 mark.
our goal was 400hp before pulley/tune now that we reached that i our next goal is 500hp with pulley/tune and with no greater then a 125shot.
Dyno Run
75 wet shot nitrous, 400HP SRT-6
Put her car on the rollers today.
Last dyno was 310hp/310tq only mod was nw cai, run was on 90 octane.
Since then took out secondary cats, isolated cooling system, one step coler plugs, plug wires, and put a zex kit on it.
all runs today were made with 108 octane.
first run no nitrous was 306hp/310tq
due to colder plugs and the fuel octane, they created a static timming drop that resulted in no gain from before.
next pass was on a 75 shot 402hp/412tq
we expected 360-370 but due to the cooling effect it had on the charge we broke the 400 mark.
our goal was 400hp before pulley/tune now that we reached that i our next goal is 500hp with pulley/tune and with no greater then a 125shot.
Dyno Run
