need some help on BAS ABS ESP light on thanks
12-30-2011, 05:52 PM
#1
Newbie
Thread Starter
Join Date: Dec 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
2002 c320
need some help on BAS ABS ESP light on thanks
car 2002 c320 w203
went an replaced all four control arms in the front and after fist start up now all those malfunction lights came on .
last time i replaced my sway bar it did same but alignment fixed it but this time still on wondering if there some sensors near control arms i mite have damaged thanks in advance
went an replaced all four control arms in the front and after fist start up now all those malfunction lights came on .
last time i replaced my sway bar it did same but alignment fixed it but this time still on wondering if there some sensors near control arms i mite have damaged thanks in advance
01-01-2012, 03:48 PM
#3
Newbie
Thread Starter
Join Date: Dec 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
2002 c320
how can i tell if i damaged ? and i wanted to add i just noticed in the night my bi xenons are not working properly , they dont rotate up an down just stay pointing down now guessing another clue to solve problem thanks for help
01-01-2012, 05:03 PM
#5
Newbie
Thread Starter
Join Date: Dec 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
2002 c320
01-01-2012, 05:27 PM
#6
Super Member
Join Date: Dec 2009
Location: USA
Posts: 541
Likes: 0
Received 21 Likes
on
12 Posts
10 speed bicycle
If you have factory Bi-xenons, then there is a level sensor somewhere on the front axle. It is either bolted to the control arm or sway bar...can't remember on the 203. However after thinking about what I said, the level sensor should have no affect on ESP, it does explain your bi-xenon issue. It is possible you have two issues.
01-01-2012, 08:13 PM
#7
Newbie
Thread Starter
Join Date: Dec 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
2002 c320
If you have factory Bi-xenons, then there is a level sensor somewhere on the front axle. It is either bolted to the control arm or sway bar...can't remember on the 203. However after thinking about what I said, the level sensor should have no affect on ESP, it does explain your bi-xenon issue. It is possible you have two issues.
