///AMGSC C32 build
#227
Member
Join Date: Apr 2015
Location: North Central PA
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
2003 c32
did you ever post up sound clips or videos of the exhaust setup? I'm not overly happy with my dual setup and thinking of having it redone come springtime
#230
Senior Member
Thread Starter
@cm60k @FlatlineEF9 @Settthhh Thanks guys, I really appreciate it.
@madspeed here's how it sounds after the headers install
@madspeed here's how it sounds after the headers install
Last edited by ///AMGSC; 12-09-2015 at 06:20 PM.
#232
MBWorld Fanatic!
Sheez you guys have to hear it in person!!
Its insanely loud hoping Marq will get some mufflers on there soon or when he does the BIG project stay tuned
![word](https://mbworld.org/forums/images/smilies/werd.gif)
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
#233
Senior Member
Thread Starter
#234
Senior Member
Thread Starter
![off topic](https://mbworld.org/forums/images/smilies/ot.gif)
#235
Senior Member
Thread Starter
![](https://cimg3.ibsrv.net/gimg/www.mbworld.org-vbulletin/640x1136/img_5463_92dafa8bd5afa58451f59d054bf0ac59dc86c78f.jpg)
![](https://cimg4.ibsrv.net/gimg/www.mbworld.org-vbulletin/640x480/img_5465_4fe8739400088ac03ec782c81a505afa425d6784.jpg)
![](https://cimg5.ibsrv.net/gimg/www.mbworld.org-vbulletin/640x480/img_5466_695397a22ede87bbd75ba3f5f7cfb3c1e3407079.jpg)
![](https://cimg6.ibsrv.net/gimg/www.mbworld.org-vbulletin/640x480/img_5467_1f6bf4c4152c415ca4d089042af9697253f98e6a.jpg)
Went to Jeff today to get the oil leak checked out. We took the alternator out to see if it was either the timing chain tensioner or a gasket in the valve cover. The tensioner was loose so we immediately knew it was that, tightened it up and now I have all that power back that I lost. Swapped in a used o2 sensor for a c240 to replace the faulty one and man does she fly now lol. Throttle response is amazing!! Can't wait to see what she puts down on a dyno.
#236
Senior Member
Thread Starter
Going to a dealer sometime this week to get all the screws and clips for the fender liner so I can install that along with a clock spring next weekend then finally we can start working on the winter project
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
Last edited by ///AMGSC; 12-19-2015 at 06:17 PM.
#238
#239
Senior Member
Thread Starter
#243
Senior Member
Thread Starter
#246
Senior Member
Thread Starter
Updated list of things on the To Do list; Had to put the headlights on hold and get these things done before I store the car.
- passenger side fender trim
- passenger side weather strip door seal rail
- driver side fog light and fender trim
- clock spring
- driver + passenger side front door pull handles
- wheel alignment; Feeling some vibration, may be due to different camber degree settings in the rear. During initial install one of the Continental tires wouldn't hold air so I had to run a different tire on the passenger side causing different camber degrees in the rear. After having a bent wheel that shredded the different brand tire I replaced it with a Continental to make the tread pattern the same all around so camber should be equal after this new alignment. Will update with how the ride feels post-alignment this weekend.
- passenger side fender trim
- passenger side weather strip door seal rail
- driver side fog light and fender trim
- clock spring
- driver + passenger side front door pull handles
- wheel alignment; Feeling some vibration, may be due to different camber degree settings in the rear. During initial install one of the Continental tires wouldn't hold air so I had to run a different tire on the passenger side causing different camber degrees in the rear. After having a bent wheel that shredded the different brand tire I replaced it with a Continental to make the tread pattern the same all around so camber should be equal after this new alignment. Will update with how the ride feels post-alignment this weekend.
#247
Updated list of things on the To Do list; Had to put the headlights on hold and get these things done before I store the car.
- passenger side fender trim
- passenger side weather strip door seal rail
- driver side fog light and fender trim
- clock spring
- driver + passenger side front door pull handles
- wheel alignment; Feeling some vibration, may be due to different camber degree settings in the rear. During initial install one of the Continental tires wouldn't hold air so I had to run a different tire on the passenger side causing different camber degrees in the rear. After having a bent wheel that shredded the different brand tire I replaced it with a Continental to make the tread pattern the same all around so camber should be equal after this new alignment. Will update with how the ride feels post-alignment this weekend.
- passenger side fender trim
- passenger side weather strip door seal rail
- driver side fog light and fender trim
- clock spring
- driver + passenger side front door pull handles
- wheel alignment; Feeling some vibration, may be due to different camber degree settings in the rear. During initial install one of the Continental tires wouldn't hold air so I had to run a different tire on the passenger side causing different camber degrees in the rear. After having a bent wheel that shredded the different brand tire I replaced it with a Continental to make the tread pattern the same all around so camber should be equal after this new alignment. Will update with how the ride feels post-alignment this weekend.
#248
Senior Member
Thread Starter
#249
Senior Member
Thread Starter
Sorry, been extremely busy since I received my firefighter written exam results back. Passed with flying colors and it's surreal that I'll be working my dream job in a matter of months. Gonna be training for my physical exam this summer so things were put on hold but whenever I get some free time I'll be working on the car as much as I can.
Did the wheel alignment and man did I need it badly haha. Next thing I have to get is the Supersprint 844247 muffler because I got stopped by the police and they gave me a fix it ticket -_- said I need a muffler or they'll tow my car. Placing the order Thursday and it takes 4 weeks for delivery so I'll give my next update when we do the install...should be a nice exhaust note running 2.75" piping from headers to the muffler.
Did the wheel alignment and man did I need it badly haha. Next thing I have to get is the Supersprint 844247 muffler because I got stopped by the police and they gave me a fix it ticket -_- said I need a muffler or they'll tow my car. Placing the order Thursday and it takes 4 weeks for delivery so I'll give my next update when we do the install...should be a nice exhaust note running 2.75" piping from headers to the muffler.