Problems w/ C32
Thread Starter
Member
Joined: May 2002
Posts: 177
Likes: 0
From: Rowland Hts
C32 AMG
Problems w/ C32
Current problems on my C32:
1. The passenger side mirror keeps changing its setting when I am driving.
2. The steering is making a "tabbing" sound. Mostly when I turn or go over small cracks. The "tabbing" can be felt through the steering wheel.
3. passenger mirror (interior) - lights off.
Any comments?
1. The passenger side mirror keeps changing its setting when I am driving.
2. The steering is making a "tabbing" sound. Mostly when I turn or go over small cracks. The "tabbing" can be felt through the steering wheel.
3. passenger mirror (interior) - lights off.
Any comments?
Super Member
Joined: Nov 2002
Posts: 533
Likes: 0
From: Chino Hills, CA
2016 C300
Re: Problems w/ C32
Originally posted by av2
Current problems on my C32:
1. The passenger side mirror keeps changing its setting when I am driving.
Any comments?
Current problems on my C32:
1. The passenger side mirror keeps changing its setting when I am driving.
Any comments?
Super Member
Joined: Mar 2002
Posts: 711
Likes: 1
Maybe
1) a very common problem, dealer will replace a module and reset the mirror for you.
2) ???
3) pilot error (or copilot error) make sure the sunshade is making contact with the two electrical strips as it is inserted.
2) ???
3) pilot error (or copilot error) make sure the sunshade is making contact with the two electrical strips as it is inserted.
Thread Starter
Member
Joined: May 2002
Posts: 177
Likes: 0
From: Rowland Hts
C32 AMG
Received the car back from the dealer yesterday.
1. No fix. They said the rotor was replaced last time. rrf, do you have the part # for the module?
2. They attemped to torque all nuts and bolts to spec, but the problem remains. They also tested another C32 that happened to be in the shop and posted to the same problem. Please check to see if your C32 have the same problem. Just leave the car idle and turn the wheel left to right a couple of times. Do you hear the thumping sound?
3. Cause: broken wiring at connector #6. Fixed by replacing a 53-1 control unit and a 53-2 electrical wiring harness.
1. No fix. They said the rotor was replaced last time. rrf, do you have the part # for the module?
2. They attemped to torque all nuts and bolts to spec, but the problem remains. They also tested another C32 that happened to be in the shop and posted to the same problem. Please check to see if your C32 have the same problem. Just leave the car idle and turn the wheel left to right a couple of times. Do you hear the thumping sound?
3. Cause: broken wiring at connector #6. Fixed by replacing a 53-1 control unit and a 53-2 electrical wiring harness.
Super Member
Joined: Mar 2002
Posts: 711
Likes: 1
Here are my notes from service.
Mirror reverse control unit (RH door)
203 820 14 85
This fixed mine, but mine didn't change while driving, it just kept "forgetting" where it should go when shifting into and out of reverse.
Mirror reverse control unit (RH door)
203 820 14 85
This fixed mine, but mine didn't change while driving, it just kept "forgetting" where it should go when shifting into and out of reverse.
