Selling my C32
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 29
Likes: 0
From: PDX / Salem
02 C32 AMG
Selling my C32
I've owned this car for a year but I need an all wheel drive vehicle instead.
Here's the list of things done by the prior owner who worked for Mercedes Benz of Beaverton before he sold the vehicle to me.
Transmission service
Valve cover gaskets
Spark plugs and wires
Water pump
Supercharger oil change
Installation of PLM Heat Exchanger for the water to air intercooler
Installation of Needs Wings coolant isolation kit for the intercooler
Since I've had the vehicle, I've installed numerous upgrades to make my 80 mile round trip commute more exciting.
Eurocharged Shorty Headers
Eurocharged 64.7mm Supercharger pulley
Eurocharged engine software
SL55 air intake y-pipe and filter boxes with cold air inlet tubes and K&N filters
H&R lowering springs
Removed the resonator
17x8.5 front wheels to match the rear wheels for a square fitment with 245/40/17's all around
This car is also equipped with a Limited Slip Differential of unknown origin.
I have also installed a new center support bearing (how I found out about the LSD).
Oil is changed every 4-5k miles with LiquiMoly and a factory Mann oil filter.
This car is stored in my heated garage every night and well maintained.
This weekend I will be removing the charger pulley, SL55 intake setup, and 8.5" wide front wheels and replacing them all with stock and selling the separate parts on here. Let me know if you are interested in any of those parts.
$10,000 obo - I don't get on here too often so email me at dennishelley@gmail.com
Here's the list of things done by the prior owner who worked for Mercedes Benz of Beaverton before he sold the vehicle to me.
Transmission service
Valve cover gaskets
Spark plugs and wires
Water pump
Supercharger oil change
Installation of PLM Heat Exchanger for the water to air intercooler
Installation of Needs Wings coolant isolation kit for the intercooler
Since I've had the vehicle, I've installed numerous upgrades to make my 80 mile round trip commute more exciting.
Eurocharged Shorty Headers
Eurocharged 64.7mm Supercharger pulley
Eurocharged engine software
SL55 air intake y-pipe and filter boxes with cold air inlet tubes and K&N filters
H&R lowering springs
Removed the resonator
17x8.5 front wheels to match the rear wheels for a square fitment with 245/40/17's all around
This car is also equipped with a Limited Slip Differential of unknown origin.
I have also installed a new center support bearing (how I found out about the LSD).
Oil is changed every 4-5k miles with LiquiMoly and a factory Mann oil filter.
This car is stored in my heated garage every night and well maintained.
This weekend I will be removing the charger pulley, SL55 intake setup, and 8.5" wide front wheels and replacing them all with stock and selling the separate parts on here. Let me know if you are interested in any of those parts.
$10,000 obo - I don't get on here too often so email me at dennishelley@gmail.com
Last edited by slomofo; Oct 9, 2015 at 01:31 PM. Reason: .
