///AMGSC C55 Build
#51
I saw your C32 thread on your build and am having issues with mine whats Jeff’s shop
I'm back in the AMG game. I missed the C32 too much after trading in for the GLK so I just had to find another one. I lucked up and found a 05 C55 with 85k miles and I gladly took it off the seller's hands haha
Finally I can do the build I've always wanted to do...c55 with clk63 front end. ![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#52
Member
#53
Junior Member
#54
Member
24 mm front, 22 mm back. https://www.drive2.ru/l/549997707519853524/ enjoy
does anyone know the stiffness ratings between those two bars 22mm vs 19mm?
Last edited by kaixdiego; 06-03-2020 at 03:01 AM.
#55
Newbie
Join Date: Feb 2019
Location: Cincinnati
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
1970 280s, 1992 300te, 2005 c55 AMG
#56
I wonder if 22mm is the actual measured spec or just based on the pictures from that russian website. The pics indicate that the BS swaybar is 22mm but also the same diameter as the stock rear C55 swaybar, which is 16mm. Doesn't quite match up. The rear bar is also not a direct fit unfortunately.
#57
Member
I also found it curious that it appears the same size as the stock sway bar... I ended up going with the H&R rear a while back after I couldn't find an Eibach one ANYWHERE and couldn't find the specs for the BS sway bars ANYWHERE until this thread.
Front and rear H&R on stiffest settings work very well in combo with upper bracing in rear from Ultra Racing.
Front and rear H&R on stiffest settings work very well in combo with upper bracing in rear from Ultra Racing.