got my wheel back after a 2.5 month wait(Flooding and stuff). Overall I think they could have done a better job on the two tone silver part. I'm not sure why but some parts of the silver was okay and the other parts show crackes at the holes. On the right side of my wheel there are some crackes at the small holes, while other parts of the wheel no crackes exist. Maybe due to the over stretching of the leather in some parts. The Black part and the stichting looks very good. I silver color was slightly off, just a tade bit darker then it should, maybe over time it might fad a little lighter. Overall for about $280.00 that's including the shipping charges, I would give it a 8.5 out of 10. It may be a 10 if I went with a different application, meaning replacing it with something else other then leather with the small holes. Like wood or carbon fiber or just all black like the bottom of the wheel. It may have been easier and looked a lot cleaner if I went with Burwood instead of the silver, since some of the holes on the silver is cracking already. Not sure long this will last, but I'm not touching the silver part if I don't have to.
Last edited by 43Volts; Jan 18, 2006 at 09:46 AM.