fstshrk

If you have not done so, please go to your garage and check the wiring that goes to your aux switch and the A/C pressure switch (attached to the A/C sight glass). I was changing the air filter on my car today and while looking around noticed that the A/C pressure switch wiring was bent at a 90 degree angle by the connector and the aux fan wiring had chafed insulation so that bare copper wire could be seen.

Straightened the A/C pressure switch wire and gave a bit of support by taping the connector at a normal angle.

Also taped over the aux fan wiring so that the wire is no longer exposed.

Of course there may be a wire holder that my car may be missing due to the previous owner, one never knows.