drilled rotors install
01-15-2011, 11:47 AM
#51
MBWorld Fanatic!
Just remember, Ceramic pad don't work at their peak until they are warm. When its raining or very cold out. I drive a half mile at around 40mph with my left foot barley on the brakes to get some heat to them... Only in extreme weather though, not everyday. Driving with two feet if for 80 years olds.
01-15-2011, 12:48 PM
#52
Senior Member
Thread Starter
tell me your likes and dizlikes about Akebono euro ceramic pads.
How long did you have them?
I just ordered them from Tirerack, I hope I made a great buy for $72 dollars?
Are they:
clean pads, like everyone's saying?
quiet pads, NO squeeling?
short stop when braking hard, car stops fast?
rotorfriendly pads, pads and rotors last longer?
any brakepad wear sensors in the package, was seen on the display box for
C32 pads?
overall, the price $72 bux on Tirerack, is it a great deal for these pads vs performance questions above?
How long did you have them?
I just ordered them from Tirerack, I hope I made a great buy for $72 dollars?
Are they:
clean pads, like everyone's saying?
quiet pads, NO squeeling?
short stop when braking hard, car stops fast?
rotorfriendly pads, pads and rotors last longer?
any brakepad wear sensors in the package, was seen on the display box for
C32 pads?
overall, the price $72 bux on Tirerack, is it a great deal for these pads vs performance questions above?
01-15-2011, 02:26 PM
#53
Just remember, Ceramic pad don't work at their peak until they are warm. When its raining or very cold out. I drive a half mile at around 40mph with my left foot barley on the brakes to get some heat to them... Only in extreme weather though, not everyday. Driving with two feet if for 80 years olds.
is it bad bite on these pads when they are cooooooooooooooooold?
There must be a bite on these pads when they are cold?
I never use the brakes on my car in traffic to make them hot in working temperature.
Driving a C43 will make the brakes stay cool all the time since it's a pritty fast car and the wind will cool them down all the time, Ride like the wind you know what I mean, man?
The bite is it good or great when these pads are cold?
I can't compare Akebonos to OEM pads, Jurids are da bom when it comes to performance braking.
01-15-2011, 02:50 PM
#54
Senior Member
Thread Starter
now you scare me dude!
is it bad bite on these pads when they are cooooooooooooooooold?
There must be a bite on these pads when they are cold?
I never use the brakes on my car in traffic to make them hot in working temperature.
Driving a C43 will make the brakes stay cool all the time since it's a pritty fast car and the wind will cool them down all the time, Ride like the wind you know what I mean, man?
The bite is it good or great when these pads are cold?
I can't compare Akebonos to OEM pads, Jurids are da bom when it comes to performance braking.
is it bad bite on these pads when they are cooooooooooooooooold?
There must be a bite on these pads when they are cold?
I never use the brakes on my car in traffic to make them hot in working temperature.
Driving a C43 will make the brakes stay cool all the time since it's a pritty fast car and the wind will cool them down all the time, Ride like the wind you know what I mean, man?
The bite is it good or great when these pads are cold?
I can't compare Akebonos to OEM pads, Jurids are da bom when it comes to performance braking.
01-15-2011, 03:51 PM
#55
Member
Join Date: Mar 2007
Location: Lantana TX
Posts: 196
Likes: 0
Received 1 Like
on
1 Post
2004 Chrysler Crossfire
I have been using Ceramic pads for almost three years now. The pads and rotors seem to last foreve, no dust and very good bite at any temp. I have heard a squeal every once in a while but that is only if the rotors got wet and had a little rust on them. I only heard the squeal when backing up with a little rust on the rotors. I am using Posi-quiet Ceramic pads.
01-26-2011, 01:24 PM
#56
MBWorld Fanatic!
Ordering these as we speak. Not getting the same pricing so I am trying to haggle! 05 c230k sport fronts 330mm and C32 Rears 300mm both cross drilled. 
01-26-2011, 01:35 PM
#57
MBWorld Fanatic!
Ok I got them down to $289.99 for all four and didn't have to pay tax or shipping. So I am pretty excited. They guy had no idea how OP got them for $249.99.
01-26-2011, 01:39 PM
#58
Member
Join Date: May 2007
Location: Dallas
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
'99 C43
Austin -
Let us know how it works out - both pricing and application. I think this is a great solution as an option to reduce the cost for the C43 brake job, and give a little bling by having drilled rotors. I've noticed that all Mercedes with drilled rotors don't have different rotors for right and left side. The right sides always look like they're spinning the "wrong way".
Given that the C230K Sport front rotors are 4mm smaller in diameter that the C43 rotors, I think it might be a good solution to bevel the edges of the new pads, so that they don't extend past the rotors. Anyone else have thoughts on this?
Let us know how it works out - both pricing and application. I think this is a great solution as an option to reduce the cost for the C43 brake job, and give a little bling by having drilled rotors. I've noticed that all Mercedes with drilled rotors don't have different rotors for right and left side. The right sides always look like they're spinning the "wrong way".
Given that the C230K Sport front rotors are 4mm smaller in diameter that the C43 rotors, I think it might be a good solution to bevel the edges of the new pads, so that they don't extend past the rotors. Anyone else have thoughts on this?
01-26-2011, 01:45 PM
#59
MBWorld Fanatic!
Will keep you posted for sure. These guys also told me that Mercedes is the ONLY company that does the same direction for both sides. Pretty weird stuff.
The OP has them on and says he had NO issues at all with them. Maybe he can chime in now that its been close to two months since he got them.
These guys also told me that Mercedes is the ONLY company that does the same direction for both sides. Pretty weird stuff. The OP has them on and says he had NO issues at all with them. Maybe he can chime in now that its been close to two months since he got them.
01-28-2011, 01:10 PM
#65
Senior Member
Thread Starter
its been snowing for 3 weeks absolutely flawless so far, im getting down to my eps/abs light is the master cylinder or the power booster,, love the rotors cant wait till spring when people see them
01-28-2011, 02:18 PM
#67
01-31-2011, 01:05 PM
#69
what kind of calipers do we have? i'm about to change my pads but autohausaz asked me this question so i haven't ordered the pads yet.
sorry to the op...now back on topic!
01-31-2011, 01:43 PM
#70
Senior Member
Thread Starter
i got my pads from the tire rack, didnt have to tell what calipers, here ya go
Akebono Euro Ceramic Pads (Premium)
Front Fitment
Material: Ceramic
Note: Front brake pads. Price: $100.00 (axle set)
$81.00 Special
Estimated Availability: In Stock
Manufacturer Part #: EUR682 Qty:
Additional Product Information
Overview | Reviews
Rear Fitment
Material: Ceramic
Note: Rear brake pads. Includes electronic wear sensor. Price: $48.00 (axle set)
$39.00 Special
Estimated Availability: In Stock
Manufacturer Part #: EUR603 Qty:
Additional Product Information
Akebono Euro Ceramic Pads (Premium)
Front Fitment
Material: Ceramic
Note: Front brake pads. Price: $100.00 (axle set)
$81.00 Special
Estimated Availability: In Stock
Manufacturer Part #: EUR682 Qty:
Additional Product Information
Overview | Reviews
Rear Fitment
Material: Ceramic
Note: Rear brake pads. Includes electronic wear sensor. Price: $48.00 (axle set)
$39.00 Special
Estimated Availability: In Stock
Manufacturer Part #: EUR603 Qty:
Additional Product Information
02-06-2011, 02:56 AM
#73
MBWorld Fanatic!
Join Date: Mar 2010
Location: Land of mountains, cheese, chocolate and watches
Posts: 5,672
Received 256 Likes
on
216 Posts
12' W204 C63 AMG coupe "T-Rex", 12' W451 Smart Fortwo Pulse (99' W202 C43 AMG sold)
OK looks good, but how much to they weigh compared to the OEM ones? You know, unprung weight, etc......
