2019 C43 + JB4 and Map 6
#1
Member
Thread Starter
2019 C43 + JB4 and Map 6
I have looked around and haven't seen anything regarding what people are setting their Map 6 boost settings but a few days ago I was chatting with John Landers from a C43 FB group (not sure if he's on here...but he was great) about different maps and he sent me over his Map 6 boost settings the he was using on his 2018. Now I know there is some power differences between the 2018 and 2019 but are these Map 6 boost settings ok for the 2019 C43?
Is anyone willing to share their Map 6's they're running on their 2019?
Thanks so much.
Is anyone willing to share their Map 6's they're running on their 2019?
Thanks so much.
#2
Former Vendor of MBWorld
For 2019 models the biggest thing is running the BCM to add more WGDC than the factory flash allows for. And that will also effect the boost request settings.
If you have a log of how your car is running now we can always evaluate it!
If you have a log of how your car is running now we can always evaluate it!
#3
Member
Thread Starter
And if I don't want to run the BCM (seems like a lot more hassle to remove for service) would these boost settings be ok for a 2019?
#4
Former Vendor of MBWorld
The C43 BCM connection is pretty easy, maybe you confused it with the C63 which is under the car. C43 right up top. But the settings themselves look OK, as I said any useful tuning advice should be based on a log of the vehicle in question not conjecture.
#5
Member
Thread Starter
Yes that is the only install guide I have seen....is there one for the C43?
#6
Former Vendor of MBWorld
Last edited by BMS; 01-10-2020 at 12:12 PM.