When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
He said Vorsteiner earlier so I figured maybe I'm not seeing something right lol
I just purchased some Stance SF10's in Bronze for my CLS. Very excited. Also was expecting to save roughly 10lbs/wheel as mentioned above but we'll see.
those are gonna look insane in the CLS!!! Can't wait for pics!
And it’s on the rim.
they look a lot like the sf-07.
I'm so freaking confused right now lol my invoice shows vorsteiner v-ff 108. And my empty box they came in says Stancewheels.com so yes I do have Stance lol
Update on a draggy pull!I kept running a consistent 4.09 0-60 on map 2. I would brake boost for about 4 seconds And the launch felt great with zero tire slip. My goal with map3 was just to break in to the high 3's When I tried to launch the same way in map 3. I was getting too much tire spin and the car was shifting into 2nd gear prematurely. 0-60 was 4.4 Well I just tried another pull this time only break boosting For maybe a full second. Zero tire spin. Crushed my 0-60 expectations
Before I do a quarter pass I keep having an issue When the car shifts into 3rd gear it bogs down, And takes a second to get going again. It's happened twice now here's What I'm talking about.
That is a really bad bog. Did you pull the log from this run or a similar run? From the video I cannot tell if it is transmission related or if it is timing being pulled due to lean conditions.
That is a really bad bog. Did you pull the log from this run or a similar run? From the video I cannot tell if it is transmission related or if it is timing being pulled due to lean conditions.
I'll take a log next time. I'm using boostane octane booster, full bottle mixed with 5 gallons of 91 should be close to 98-100 octane. Not sure what to think of it. I had this happened with map 2 once bogging in 2nd gear. Kind of wondering if When the ECU detects wheel spin It prematurely shifts into the next gear?
I'll take a log next time. I'm using boostane octane booster, full bottle mixed with 5 gallons of 91 should be close to 98-100 octane. Not sure what to think of it. I had this happened with map 2 once bogging in 2nd gear. Kind of wondering if When the ECU detects wheel spin It prematurely shifts into the next gear?
Does this happen on Map 1? What do your CSV files look like for both Map1 and Map 2?
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
