Vancouver, BC Meet
03-30-2009, 06:52 PM
#1376
MBWorld Fanatic!
Join Date: Oct 2006
Location: Vancouver BC
Posts: 1,203
Likes: 0
Received 2 Likes
on
2 Posts
Flying Spur
i was able to make 481 rwhp and 563 rwtq
i posted my results here
https://mbworld.org/forums/w211-amg/...o-results.html
i posted my results here
https://mbworld.org/forums/w211-amg/...o-results.html
is that around what you were expecting?
03-30-2009, 07:06 PM
#1377
MBWorld Fanatic!
i was hoping to be in that area.
i was corresponding with cory at kleeman and he said the numbers look good but if i can get a proper 4th gear pull done then the dyno run would show another 10-20 rwhp, so there is a chance i can hit 500! 4th gear for my car is the closest 1:1 gear ratio and that gives the most accurate results. 1st to 3rd gears are apparently torque multiplying gears and they actually reduce the peak hp on dynos.
too bad it cut me off almost 1000rpm before redline on my 4th gear pull.
im want to go back up there and try again!
i was corresponding with cory at kleeman and he said the numbers look good but if i can get a proper 4th gear pull done then the dyno run would show another 10-20 rwhp, so there is a chance i can hit 500! 4th gear for my car is the closest 1:1 gear ratio and that gives the most accurate results. 1st to 3rd gears are apparently torque multiplying gears and they actually reduce the peak hp on dynos.
too bad it cut me off almost 1000rpm before redline on my 4th gear pull.
im want to go back up there and try again!
03-30-2009, 07:20 PM
#1378
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2008
Location: Vancouver, Canada
Posts: 3,082
Likes: 0
Received 0 Likes
on
0 Posts
R8
i was hoping to be in that area.
i was corresponding with cory at kleeman and he said the numbers look good but if i can get a proper 4th gear pull done then the dyno run would show another 10-20 rwhp, so there is a chance i can hit 500! 4th gear for my car is the closest 1:1 gear ratio and that gives the most accurate results. 1st to 3rd gears are apparently torque multiplying gears and they actually reduce the peak hp on dynos.
too bad it cut me off almost 1000rpm before redline on my 4th gear pull.
im want to go back up there and try again!
i was corresponding with cory at kleeman and he said the numbers look good but if i can get a proper 4th gear pull done then the dyno run would show another 10-20 rwhp, so there is a chance i can hit 500! 4th gear for my car is the closest 1:1 gear ratio and that gives the most accurate results. 1st to 3rd gears are apparently torque multiplying gears and they actually reduce the peak hp on dynos.
too bad it cut me off almost 1000rpm before redline on my 4th gear pull.
im want to go back up there and try again!
03-30-2009, 07:24 PM
#1379
MBWorld Fanatic!
Join Date: Oct 2006
Location: Vancouver BC
Posts: 1,203
Likes: 0
Received 2 Likes
on
2 Posts
Flying Spur
i was hoping to be in that area.
i was corresponding with cory at kleeman and he said the numbers look good but if i can get a proper 4th gear pull done then the dyno run would show another 10-20 rwhp, so there is a chance i can hit 500! 4th gear for my car is the closest 1:1 gear ratio and that gives the most accurate results. 1st to 3rd gears are apparently torque multiplying gears and they actually reduce the peak hp on dynos.
too bad it cut me off almost 1000rpm before redline on my 4th gear pull.
im want to go back up there and try again!
i was corresponding with cory at kleeman and he said the numbers look good but if i can get a proper 4th gear pull done then the dyno run would show another 10-20 rwhp, so there is a chance i can hit 500! 4th gear for my car is the closest 1:1 gear ratio and that gives the most accurate results. 1st to 3rd gears are apparently torque multiplying gears and they actually reduce the peak hp on dynos.
too bad it cut me off almost 1000rpm before redline on my 4th gear pull.
im want to go back up there and try again!
btw i was going through my photobucket n found this
03-30-2009, 07:55 PM
#1381
MBWorld Fanatic!
03-30-2009, 07:56 PM
#1382
MBWorld Fanatic!
03-30-2009, 07:58 PM
#1383
MBWorld Fanatic!
i called miller and they said their dyno is good till 225mph, i should have asked how it was setup on the day we went there.
anyways best thing is to try again and go from there!
03-30-2009, 09:52 PM
#1387
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2008
Location: Vancouver, Canada
Posts: 3,082
Likes: 0
Received 0 Likes
on
0 Posts
R8
03-30-2009, 10:39 PM
#1389
Member
Join Date: Mar 2004
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
M3
03-31-2009, 06:31 PM
#1392
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2008
Location: Vancouver, Canada
Posts: 3,082
Likes: 0
Received 0 Likes
on
0 Posts
R8
Is the missing word in that space "drive"? As in I'll get my gf to run over some of you guys with my soon-to-be 600 whp monster??
04-01-2009, 02:55 AM
#1395
Super Member
Join Date: Jun 2008
Location: Vancouver, Canada
Posts: 658
Received 0 Likes
on
0 Posts
Porsche 911 Carerra 4S
04-01-2009, 11:54 AM
#1397
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2008
Location: Vancouver, Canada
Posts: 3,082
Likes: 0
Received 0 Likes
on
0 Posts
R8
04-01-2009, 01:41 PM
#1400
Super Member
Join Date: Jun 2008
Location: Vancouver, Canada
Posts: 658
Received 0 Likes
on
0 Posts
Porsche 911 Carerra 4S
