Has anyone installed the KUDA cellphone holder?
#1
Member
Thread Starter
Join Date: Apr 2008
Location: San Diego
Posts: 114
Likes: 0
Received 1 Like
on
1 Post
2016 C450 (on order)
Has anyone installed the KUDA cellphone holder?
I just purchased and received the KUDA cellphone holder from KUDA USA. I've purchased and installed their products before in previous cars (Porsche 911 and Cayenne S) and have been very happy with the products overall. Just received the package today and, in looking over the installation instructions, I see that I must remove various pieces of interior molding i.e. the ventilation controller. Before I start pulling stuff apart I wanted to get pointers anyone might have in order to avoid damage. It looks pretty easy but wanted to consult for advise before I start. Anyone install this?? Any advise??
http://www.kudausa.com/kuda_mount_an...08-25-547.html
http://www.kudausa.com/images/consoles/1822.jpg
Thanks.
http://www.kudausa.com/kuda_mount_an...08-25-547.html
http://www.kudausa.com/images/consoles/1822.jpg
Thanks.
#3
Member
Thread Starter
Join Date: Apr 2008
Location: San Diego
Posts: 114
Likes: 0
Received 1 Like
on
1 Post
2016 C450 (on order)
That's all it does! In my experience, KUDA makes the nicest, most aesthetic cell phone holders out there. I have an iPhone 3G and are often placing and receiving calls via the voice control features on the C63- its handy to see the iPhone screen without using the cupholder in the car. In addition I often use the iPhone to display traffic conditions here in San Diego- the holder is essential to safety with this!
#4
Senior Member
Join Date: Jul 2009
Location: Latitude 26.1695, Longitude -80.0997
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
my wife wild, but she loves every minute of it.
I just purchased and received the KUDA cellphone holder from KUDA USA. I've purchased and installed their products before in previous cars (Porsche 911 and Cayenne S) and have been very happy with the products overall. Just received the package today and, in looking over the installation instructions, I see that I must remove various pieces of interior molding i.e. the ventilation controller. Before I start pulling stuff apart I wanted to get pointers anyone might have in order to avoid damage. It looks pretty easy but wanted to consult for advise before I start. Anyone install this?? Any advise??
http://www.kudausa.com/kuda_mount_an...08-25-547.html
http://www.kudausa.com/images/consoles/1822.jpg
Thanks.
http://www.kudausa.com/kuda_mount_an...08-25-547.html
http://www.kudausa.com/images/consoles/1822.jpg
Thanks.
http://www.pro-fit-intl.com/mercedes
#5
Member
Thread Starter
Join Date: Apr 2008
Location: San Diego
Posts: 114
Likes: 0
Received 1 Like
on
1 Post
2016 C450 (on order)
Here is the link to the installation instructions as provided by KUDA.
http://www.kudausa.com/manuals/09177...ab_04-2007.pdf
http://www.kudausa.com/manuals/09177...ab_04-2007.pdf
Trending Topics
#8
Member
Thread Starter
Join Date: Apr 2008
Location: San Diego
Posts: 114
Likes: 0
Received 1 Like
on
1 Post
2016 C450 (on order)
Finally got the guts to install the holder and it went perfectly! The holder installs perfectly even without the screws as called for in the instructions. The pressure fit from reinstalling the ventilation controls and cover hold the holder without the screws thereby not having to add screw holes. Looks great and is very solidly mounted. Good product- recommended.
#9
Super Member
Join Date: May 2009
Location: Pittsburgh, PA
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
2013 Nissan GT-R BE
That's all it does! In my experience, KUDA makes the nicest, most aesthetic cell phone holders out there. I have an iPhone 3G and are often placing and receiving calls via the voice control features on the C63- its handy to see the iPhone screen without using the cupholder in the car. In addition I often use the iPhone to display traffic conditions here in San Diego- the holder is essential to safety with this!
http://www.kudausa.com/iphone_pass_t...one-1455.html#
Sheep
#10
Senior Member
Join Date: Oct 2008
Location: New York
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
C350
Finally got the guts to install the holder and it went perfectly! The holder installs perfectly even without the screws as called for in the instructions. The pressure fit from reinstalling the ventilation controls and cover hold the holder without the screws thereby not having to add screw holes. Looks great and is very solidly mounted. Good product- recommended.
Any pics that you could share?
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Rich
#11
Senior Member
Join Date: Jul 2009
Location: Latitude 26.1695, Longitude -80.0997
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
my wife wild, but she loves every minute of it.