x838nwy

Is it just me, or is there a strange lack of wheel choice for the C63? In comparison to cars like the M3, C63 users seem limited to HRE, Vossen and if you're not worried about when - if ever - you get your wheels 360.

I'm a fan of BBS wheels but alas, they don't seem to make any that fit. Even Volks, as far as I know, don't either...

Is it to do with a unique bolt pattern/offset or something strange on the c63?

Jae Duk

I believe it's our high offset. Look around. There is actually quite a bit. I believe works will fit. I think a new brand "Venaci" is coming out with some? But these are usually seen more on Japanese cars. But if you like them then
Search around the c63 forums, you'll see a lotta sponsors post here and you'll find them.

c32AMG-DTM

Usually if there's enough demand, the wheel manufacturers will cater to the platform - since (at least historically) BMW sells more M3s than all AMG models combined, they probably didn't feel it was worth it. I know some w203 AMGs and w211 AMGs that run BBS wheels, but with hubcentric spacers to get it to work properly.

Also, don't overlook the offerings from MB specific tuning shops - Renntech has some very nice wheels, as does Kleemann.

UGOTMOPPED

F that. I want some LM's for my AMG. NUFF SAID...

Azn_C300

LMs would be great, but really, you have plenty of options. ALL forged lines can make proper wheel fitment. As mentioned HRE, Vossen, 360/Forgeline as well as DPE, IForged, Maya, Vellano, Vertini, VIP Modular, Auto Couture, Lowenhart, Klassen, Enkreuz, Work, COR, Modulare, Kranson, Mandrus, etc. Even some cast/rep wheel lines like Forgestar, VMR, and MRR have fitments. BBS would be great, but there are options out there.

UGOTMOPPED

BBS is the OG originator. I am aware of all those brands. I have had 5 sets of HRE's on my car within this yr...But nothing screams quality like BBS.

Sincity

MRR has a new w204 fitment. I called TSW and even they don't have any plans for a C63 rear fitment. I think it is the rear staggered fitment with a 50 offset that seems to be the issue and not the fronts.

CLK FAN

I just went to the BBS site and tried the configurator ( http://www.bbs.com/en/configurator/configurator.html ) and chose the W204 and the system automatically gives you what looks to be the RS-GT in 19" and many others if you choose the overview of wheels choice once you've chosen the W204. I just don't see the LM in that overview of options.

I'm not sure if what you mean by BBS is the LM not being in your fitment but you didn't specify that in your post. Check the site link I posted and try for your self.

But out of all the BBS wheels option they have on the their site for the W204 fitment the best looking one is the RS-GT. YOU CAN EVEN LOWER THE CAR ON THE SITE.....IT LOOKS REALLY NICE. Check out the attachment also.

FORGED DST

Just PM me with your order you will get them, and when you are told you will get them. Just like the last 2 C63 customers who actually even got them a week early and with custom finishing too .

NickZag

Most manufactures offer wheels, they just don't carry them in stock and make them after the order (Asanti, MHT, etc).

all8up

Interesting, did not know VMR had fitments. I called them a month ago and they said they never test fitted a C63 but if someone was local to Socal, they would be willing to develop a wheel.

Either way, you are right Azn, there are some choices out there for us.

wadgras44

VMR doesn't really have a lot of great choices. Some styles are offered in a 8.5" wheel with a 45 offset in our bolt pattern w/ the 66.1 centerbore. That should be fine in the front, but look pretty tucked in the the back. I believe someone on the W204 thread has pictures with 18" CSL reps (VB3). Can't remember who, though.

exdes

I wanted some V710s but they didn't have any correct offsets for C63..
Most of their 5x112 wheels are for VW/Audi

Unbreakable1

well i just contacted them via e-mail. I'll give them a call a little later if i don't get a response and see what they say...

Azn_C300

I know Sonic Motorsports in the Bay area test fit v710s on 204s and even held a group buy for 204s last year.

exdes

This was the response i got when i inquired last year..


I asked again last night if they had anything now, and the answer was simply "no".

Unbreakable1

yea i received the answer about the spokes and hub and what not...

i guess ill see what SonicMS has to say...

benyl

why not just order the Forgestar version. It is the same mesh/CSL style as the VMR.

Azn_C300

This is just plain false as I know plenty of MBs sporting VMR wheels.

Unbreakable1

i juss called SonicMS and the guy said vmr doesnt offer staggered setups for the audi's (5x112, all are 18/19x8.5) so it wouldnt really work for us, even if they could get proper fitment

however...a quick check on VMRs site reveals that to be false..for example:

v701 is offered in 19x8.5 and 19x9.5 for both bolt patterns (5x112 and 5x120) w/ offsets at 45

sooooooo now what?

exdes

you try and let us know..

Unbreakable1

i wish i knew....VMR apparently doesnt want/cant get them on our cars

Azn_C300

keep in mind you can run non-staggered setup on these cars. Just use spacers to push out the rear. But yeah, VMR does offer staggered setup.

Godfather@ONE Autosport

Keep in mind that Forgestar wheels are custom made for your application, whereas off the shelf wheels like VMR and the likes aren't and while they may fit, they may not always have the best optimal fitment (as flush as possible, while retaining perfect clearance).

Sincity

True. But we need the wider rears to put the rubber down.