Dyno results are in for 2nd cat X pipe
#102
Former Vendor of MBWorld
Thread Starter
Join Date: Jan 2009
Location: CA working like a slave
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG Arctic w/ Stage 1 Tune, DoubleXX pipe, MCD-631X coming soon
Not being big on medication, can someone tell me what you guys are suggesting to me? I will pass this on to my doc, to see if this is something he wants to put us on. Right now, we're taking Naproxinsodium and hmmm I forgot the name, it's a muscle relaxer, very small yellow round pills.
#103
MBWorld Fanatic!
I take SOMA for my back on occassion. It is a muscle relaxer, however, anything over 250mg would make you very drowsy going onto to next AM. My doc gives me both 250 and 350. I have since stopped taking the 350 and only the 250 on occassion because it is very addicting. Hydrocodone is a strong pain reliever.
#105
MBWorld Fanatic!
Join Date: Jul 2009
Location: FL
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 AMG
https://mbworld.org/forums/3896643-post58.html
Last edited by sflgator; 01-29-2010 at 03:47 PM.
#106
Super Member
Everyone thinks this product is no big deal and easy to make. I don't know anything about GT Pro, but I do have welding and fabrication experience and people don't understand the time it takes to hand make something like this. The time it takes for welding a perfect X (without a single leak) out of hollow stainless steel takes time, making sure it's made perfectly to bolt onto the car without a single flaw. The cost alone of tubed stainless is very expensive. For the record, I'm not going to buy it (sorry, I'm a cheap ******* and the stock HP and TQ are perfect for my track needs), but the gains sound decent.
Last edited by NickZag; 01-30-2010 at 08:31 PM.
#107
Former Vendor of MBWorld
Thread Starter
Join Date: Jan 2009
Location: CA working like a slave
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG Arctic w/ Stage 1 Tune, DoubleXX pipe, MCD-631X coming soon
Thank you Nickzag, well put.
There are many ways to go about this, our way, or the muffler shop chop/hack/weld, however everyone will have their opinions as to what is right for them, and I am no one to judge. I just feel that if you buy a nice car like a C63, it is a travesty to hack/chop your car at a muffler shop (no offence guys), but some will still do it, and that might be ok for them.
Basically boils down to this. I have only shown the LOWEST gains we have ever seen, NOT the highest, nor the biggest differential of lowest stock HP vs the highest Xpipe hp gain. I have posted the highest stock HP vs the lowest gain our Xpipe has seen, to ensure something for us... No matter what, the gains "actual" that will be attained are beyond our "claims", and EVERY, I mean EVERY customer of our product have been nothing but pleased, if there was a single person unhappy, I would gladly give them 100% money back, no questions asked. To this date, no one has taken me up on the offer..I do however have references of many happy customers willing to speak to anyone here about their experience with us and our products. Our product is MINIMALLY invasive, easy to install and a complete PROVEN product tested on the dyno and on the track.
Judge for yourselves, we stand behind what we do..We RACE/PROVE/DYNO our parts, no ands if's or buts. This is what we've done for the past 15 years, and we're not changing!
There are many ways to go about this, our way, or the muffler shop chop/hack/weld, however everyone will have their opinions as to what is right for them, and I am no one to judge. I just feel that if you buy a nice car like a C63, it is a travesty to hack/chop your car at a muffler shop (no offence guys), but some will still do it, and that might be ok for them.
Basically boils down to this. I have only shown the LOWEST gains we have ever seen, NOT the highest, nor the biggest differential of lowest stock HP vs the highest Xpipe hp gain. I have posted the highest stock HP vs the lowest gain our Xpipe has seen, to ensure something for us... No matter what, the gains "actual" that will be attained are beyond our "claims", and EVERY, I mean EVERY customer of our product have been nothing but pleased, if there was a single person unhappy, I would gladly give them 100% money back, no questions asked. To this date, no one has taken me up on the offer..I do however have references of many happy customers willing to speak to anyone here about their experience with us and our products. Our product is MINIMALLY invasive, easy to install and a complete PROVEN product tested on the dyno and on the track.
Judge for yourselves, we stand behind what we do..We RACE/PROVE/DYNO our parts, no ands if's or buts. This is what we've done for the past 15 years, and we're not changing!
#109
Former Vendor of MBWorld
Thread Starter
Join Date: Jan 2009
Location: CA working like a slave
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG Arctic w/ Stage 1 Tune, DoubleXX pipe, MCD-631X coming soon
#110
#111
the car...i dont really know how to describe it...She sounds soooo much more refined at lower rpms ( < 4k), and hopefully i dont get destroyed for offering this comparison, but almost Italian-like.....above 4k She maintains the beast quality that we all love, slightly louder
the resonator was not removed so its not ridiculously loud
Can you remove the resonator if you want it louder and does this make the job more difficult?
#112
MBWorld Fanatic!
Join Date: Jul 2009
Location: FL
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 AMG
#113
So people use K&N in place of them?
Is this the correct K&N for our car?
http://www.knfilters.com/search/prod...x?Prod=33-2405
#114
Brian, I've been trying to reach you by phone with no luck for few days now. I am interested in the X pipes.
But first would you tell me how much louder they are than stock? I want my car to be louder.
Also, I know you already said that you haven't tried if they work with LT headers, but would there be any fitment issues regarding them?
But first would you tell me how much louder they are than stock? I want my car to be louder.
Also, I know you already said that you haven't tried if they work with LT headers, but would there be any fitment issues regarding them?
#115
Former Vendor of MBWorld
Thread Starter
Join Date: Jan 2009
Location: CA working like a slave
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG Arctic w/ Stage 1 Tune, DoubleXX pipe, MCD-631X coming soon
Brian, I've been trying to reach you by phone with no luck for few days now. I am interested in the X pipes.
But first would you tell me how much louder they are than stock? I want my car to be louder.
Also, I know you already said that you haven't tried if they work with LT headers, but would there be any fitment issues regarding them?
But first would you tell me how much louder they are than stock? I want my car to be louder.
Also, I know you already said that you haven't tried if they work with LT headers, but would there be any fitment issues regarding them?
They do make the car louder than stock. We do have a R-1 which removes the resonator, and no it does not make things harder install wise.
LT's fitment issues, again, not sure, I've not tried so I can't say for sure.
#116
Hi guys, we just finished Unbreakable1 's C63 dyno.
This is no way is advocating the removal of smog components, and is only meant for testing purposes.
Test conditions:
Baseline fully stock 91 Oct vs
GT PRO's new product called the "Single X" secondary cat delete for C63. (yes it is totally removable and your cats can be reinstalled after the test)
Baseline best (not lowest#, but HIGHEST # baseline was used)
Test was also performed with charcoal filter removed as well. (we saw 10hp 7tq on this mod alone)
We picked up 15RWHP and 19TQ, but the best part is that in the mid range we're picking up 25RWHP and 27tq, the mods also show a gain everywhere in the curve.
I hope you guys like it. We will be doing a formal release of the "Single X" and "Double XX" by this weeks end.
This is no way is advocating the removal of smog components, and is only meant for testing purposes.
Test conditions:
Baseline fully stock 91 Oct vs
GT PRO's new product called the "Single X" secondary cat delete for C63. (yes it is totally removable and your cats can be reinstalled after the test)
Baseline best (not lowest#, but HIGHEST # baseline was used)
Test was also performed with charcoal filter removed as well. (we saw 10hp 7tq on this mod alone)
We picked up 15RWHP and 19TQ, but the best part is that in the mid range we're picking up 25RWHP and 27tq, the mods also show a gain everywhere in the curve.
I hope you guys like it. We will be doing a formal release of the "Single X" and "Double XX" by this weeks end.
#119
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,060
Received 2,840 Likes
on
1,675 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Try doing a search instead of bumping 10 year old threads
#120
#122
SPONSOR
Join Date: Sep 2014
Location: Worldwide
Posts: 3,628
Received 798 Likes
on
570 Posts
2007 Mercedes E63 AMG
maybe this works? has OEM style ball flanges.
https://www.ebay.com/i/233034600034?...BoC0nkQAvD_BwE
sorry that might be the wrong style...maybe resonator delete.
is MBH still in business?
https://www.mbhmotorsports.com/produ.../c63-oem-xpipe
https://www.ebay.com/i/233034600034?...BoC0nkQAvD_BwE
sorry that might be the wrong style...maybe resonator delete.
is MBH still in business?
https://www.mbhmotorsports.com/produ.../c63-oem-xpipe
Last edited by hachiroku; 09-17-2020 at 06:53 PM.
#123
Senior Member
I have a hard time understanding $600 even for an x pipe.
I can buy all of the parts to make one, pre-bent for like less than $200 on amazon. It just involves some sectioning and welding.
The luxury tax on these cars is intense.
I can buy all of the parts to make one, pre-bent for like less than $200 on amazon. It just involves some sectioning and welding.
The luxury tax on these cars is intense.
The following users liked this post:
hachiroku (09-18-2020)
#124
you are right brother it is absurd, I know mbh x pipe is a 3 inch diameter, was looking for a direct bolt on, the resonator delete x pipe on ebay looks okay anyone heard good things about Topspeed tho? I'll stop by some local shops and see what I can do... appreciate all the help guys!
#125
MBWorld Fanatic!
Join Date: Feb 2010
Posts: 5,513
Received 433 Likes
on
356 Posts
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
you are right brother it is absurd, I know mbh x pipe is a 3 inch diameter, was looking for a direct bolt on, the resonator delete x pipe on ebay looks okay anyone heard good things about Topspeed tho? I'll stop by some local shops and see what I can do... appreciate all the help guys!