Race ported heads from MHP going on tomorrow!!
#26
MBWorld Fanatic!
Join Date: Jun 2007
Location: Philadelphia, PA
Posts: 2,949
Likes: 0
Received 0 Likes
on
0 Posts
2008 A8L, 2002 996TT X50, 2009 X5
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
Any specific "easy-going" break-in required? If not, how long until you track- or dyno-test 'em?
![devil](https://mbworld.org/forums/images/smilies/devil.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#28
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2008
Location: Central Florida
Posts: 2,177
Likes: 0
Received 13 Likes
on
12 Posts
2014 Audi RS7
We'll probably break it in like we break everything else in. ![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Hope to thrash it tonight and tomorrow and get some 100 octane added and get it on the dyno late tomorrow or Thursday. We have some other preparations to make prior to the mile run this Sunday in Miami.
Louder, that must be a comment from someone who's heard these monsters with L/T headers and no cats.
I guess its perspective. Can they really get louder?? HEHEHEHEHE!
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Hope to thrash it tonight and tomorrow and get some 100 octane added and get it on the dyno late tomorrow or Thursday. We have some other preparations to make prior to the mile run this Sunday in Miami.
Louder, that must be a comment from someone who's heard these monsters with L/T headers and no cats.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#30
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2008
Location: Central Florida
Posts: 2,177
Likes: 0
Received 13 Likes
on
12 Posts
2014 Audi RS7
She's alive and well. Here's a few more pics. Gotta get some miles on here before the dyno tomorrow but she feels strong. Will post up some dyno data tomorrow am. Glad she's back together and running smoothly and stronger once again!!
#32
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2008
Location: Central Florida
Posts: 2,177
Likes: 0
Received 13 Likes
on
12 Posts
2014 Audi RS7
Nothing will have changed except the heads. I am trying to make it a good comparison with no other changes. She pulls consistently between 450 and 455rwhp in the Florida heat with this tune. Extremely rich for making the mile run this weekend. May lean out a little with the head work but thats what we are counting on.
We'll all know by tomorrow lunch.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#37
Senior Member
Join Date: Dec 2008
Location: Central Florida
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
STS, Tahoe, Suzuki, and C63
OUCH!!!!!!!! In Ron's defense, his car does have green valve covers and calipers. Looking oh so awesome!!!!
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
p.s. Not being a smart *** Ron, I really do like the green accents.
Last edited by benscott01; 10-08-2009 at 10:38 PM. Reason: 111
#42
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2008
Location: Central Florida
Posts: 2,177
Likes: 0
Received 13 Likes
on
12 Posts
2014 Audi RS7
We got dyno numbers but they aren't a good comparison. We live in Florida and the weather today was one of the worst days for heat and humidity we've had in a long while. It was the only time we had left before Sunday. Even with the terrible conditions we gained a few horses. I believe when the weather improves we will see significant gains. If you don't live in Florida then you can't understand how conditions affect the power. We are running the mile in Miami Sunday.
As soon as we can get some decent weather we'll get back on the dyno. Sorry for the delay but until the weather improves I can't get a good comparison. Hang in there. It will be worth the wait!!
As soon as we can get some decent weather we'll get back on the dyno. Sorry for the delay but until the weather improves I can't get a good comparison. Hang in there. It will be worth the wait!!
#45
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2008
Location: Central Florida
Posts: 2,177
Likes: 0
Received 13 Likes
on
12 Posts
2014 Audi RS7
I've seen correction factors for the 1/4 mile in dragtimes but not correction factors for heat, humidity, and baro for simply a dyno pull. Where and what is it?
The cost is on the MHP web site.
The cost is on the MHP web site.
#46
MBWorld Fanatic!
Well atleast a GOOD operator.
Anyway, hope it works out for you
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#47
MBWorld Fanatic!
Join Date: Dec 2006
Location: Clifton, NJ
Posts: 4,949
Likes: 0
Received 38 Likes
on
33 Posts
96 and 08 911 turbos
It will either say uncorrected, SAE, or STD.
STD tends to run about 4% higher than SAE, which is the most universally agreed upon correction factor.
#48
MBWorld Fanatic!
Join Date: Oct 2008
Location: Central Florida
Posts: 1,521
Likes: 0
Received 3 Likes
on
3 Posts
2013 Chevy 427 Torch Red
How would the correction factor explain the following:
MKB Shorties/ MHP tune consistent dyno pulls ~455 in March 70 Degrees little humidity
Same car same dyno in July 95 degrees 60% humidity ~425
Kleemann K2 dyno in March conditions pulls~435
Same car same dyno in July pulls ~415
Keith's car dropped 30 hp and mine lost 20 comparing March numbers to July with an SAE 1.01 and smoothing set to 5. This on the same dynojet that we have probably made 30 or 40 pulls on. The last several days have been in the mid 90's with 60%+ humidity. So despite the correction factor I expect the 457 that I pulled in July will probably be 470+ in December and Keith's car which pulled 472 in July will be closer to 490.
MKB Shorties/ MHP tune consistent dyno pulls ~455 in March 70 Degrees little humidity
Same car same dyno in July 95 degrees 60% humidity ~425
Kleemann K2 dyno in March conditions pulls~435
Same car same dyno in July pulls ~415
Keith's car dropped 30 hp and mine lost 20 comparing March numbers to July with an SAE 1.01 and smoothing set to 5. This on the same dynojet that we have probably made 30 or 40 pulls on. The last several days have been in the mid 90's with 60%+ humidity. So despite the correction factor I expect the 457 that I pulled in July will probably be 470+ in December and Keith's car which pulled 472 in July will be closer to 490.
#49
MBWorld Fanatic!
Join Date: Dec 2006
Location: Clifton, NJ
Posts: 4,949
Likes: 0
Received 38 Likes
on
33 Posts
96 and 08 911 turbos
Couldn't tell you, but its pretty rare for a car to drop 30+ hp, especially when corrected.
Perhaps the timing advance gets overly conservative with higher IATs or maybe the car tends to heat soak really badly.
Were you consistent in your method (i.e. cooldown)?
Perhaps the timing advance gets overly conservative with higher IATs or maybe the car tends to heat soak really badly.
Were you consistent in your method (i.e. cooldown)?
#50
MBWorld Fanatic!
Thread Starter
Join Date: Sep 2008
Location: Central Florida
Posts: 2,177
Likes: 0
Received 13 Likes
on
12 Posts
2014 Audi RS7
I hear you on the correction factor but I do know that the temperature, humidity, and baro are all a huge factor on the dyno. If you dyno a car in 50 degree weather it will show more HP than in 95 degree weather. Don't care who's dyno or what kind of dyno you are on. The car pulled 462/415 yesterday in the horrible very heavy air so I am satisfied. With better air/temperature she'll pull much better numbers. Trust me, we'll find out as soon as possible.