i installed k2 today and these are the results

 

Photobucket.com. Upload u pic get the link from there and post here.

Now was the number sae corrected 5th gear or something else. Congrats by the way

 

Ya they are corrected ya 5th gear.Thanks for the help to upload the pic.

 

how you like it?

 

it feels faster and i like that its not too loud.

 

14 AFR is a little lean for my taste. Power is good though..

 

Those are some nice numbers! What's the next mod? Cams?

 

You gained 113 whp from just tune and exhaust manifolds? (assuming of course a stock C63 dynos around 370 whp). Very nice gains....

 

Ya i don't think it will cause any problem.

 

Thanks ya cams and LTs are my next mods.

 

I gained exactly 105WHP because my car stock was 378whp.

 

Great numbers man!! I think I'm gonna take the plunge and go with the K2 in this case!!

But isn't an AFR of 14.XX too lean?! just wondering!!

 

Its little lean it won't effect the car.

 

the AFR ratio on the sheet depicts the peak value. In order to display peak HP and TQ, our software looks for peak values of all values being graphed, including AFR. Under full load, peak power, AFR was about 12.2:1 if I recall correctly.

 

Thanks for explaining cory.

 

12.2 is much better than 14.X at WOT

 

Congratulations!!!!! Those numbers are way higher than what I recall as typical for K2.

 

Your K1 numbers are high as well. U are putting out some power.

 

If you have a chance to get to a track with decent DA then give it a whirl. You are making almost the same power numbers as Dad'sC63.

 

Thanks guys.Maybe am lucky with my car or its the way i drive the car gains the most HP :p HAHA
hhughes1:In feb i will take it to a track in texas because the weather is bad here in denver it always snows and the track are closed.I will get MHP LTS in few months and i hope i get too 500WHP.Then my next step is MHP cams.

 

You should get some light weight rims too. That will also really help.

 

I will soon.

 

Those are nice numbers you got there. Congrats!

 

Nice numbers!
What kind of CF?
Was the baseline done on that dyno in comparable conditions?

Keep up the good work!

 

Wait....you just installed K2 and a few months ready for MHP LTs? Why didn't you just go straight to the LTs? By the time you are ready for the LTs, Eurocharged should have theirs available.

Weather is cooler which may help his HP.