sjhugh

As this is the C63 section, I’d rather see these rims in offsets that suit the C63.



As it is, these photos are worthless because the loss of dish makes for a completely different and sometimes awful look.



.

D2FORGED

Since we just wrapped a C63 with the latter wheels shown here, we'll get that snaps for you ready and avoid this dilemma.

ed4

Two sets of wheels showed up for me a few days ago at work. Can't wait to get tires mounted on these tomorrow.

ed4

Challenge Motorwerks forged wheels (right wheel):

natman316

nice i am waiting to put a set of adv10.1sl on myself. those 5.01sl looks great, can wait to see it on your car.

ed4

I love the 10.1SL's too. My second set are very, very similar to the 10.1SL.

Post up pics when you put yours on

ed4

I test fitted the new wheels today. In a moment of weakness, I decided that they needed to be tested some more. I'll take these off in a day or two.

The wheels have Michelin PSS mounted on them. It's in the 30's here in NY, and the PSS traction is kinda bad on dry, cold roads

I'll put back my stock wheels w/ the Dunlop Wintersport 4D's soon

(Sorry for sucking so badly at taking pics.)

Roswell

Very nice ADV wheels... love the concavity in the rear.

Are you rubbing with ur PSS?

ed4

Thanks

It rubs very slightly, with a strategically placed, fat co-worker sitting in the back seat for the test run, over wavy roads. When driving it from work, running errands afterwards, then going home, it didn't rub once.

It's a 10" wheel, with 275/30 19" tires and an H&R drop

Roswell

Yeah, PSS runs wider than other brands so I'm not surprised ur rubbing with ur 275.. Maybe try 265 PSS or 275 from another brand like Contis.

Our cars offset sucks, it's so hard to run 275 or 285 w/o rubbing unless u have wider fender flares.

natman316

since we have the same-ish wheel, i'll ask u. does the 275 look stretched on 10" I can be pretty careless with my wheels sometime i hope theres enough sidewall to protect the wheel lol.

and btw why did u buy two sets of wheels, and have the stock one!?

Roswell

Nat, 275 on a x10 rim is definitely stretched a little even with PSS.. U can see it in the pics above.

If u want a meaty tires with lots of wheel protection, u should have asked ADV to make u a 19x9 +45mm .. And buy some 275/30 or 285/30 then u will have bulgy sidewalls.

Roswell

Nat, here is an old pic of my 19x9 +44mm with 255/30/19 to give u an idea of the sidewalls for added wheels protection. Now imagine putting 275 or 285, u will have meaty tires the way u like them. LOL


The fronts are 19x8 +33mm with 235/35.. again u can go 245/35 for more wheels protection.

C-63AMG

Wheel Protection

295 on a 9.5"

The 305 looked ridiculous.



Oh and a photo of the new rims for this thread:

natman316

Lol 285 or 275 maybe too bloated for x9. I guess i'll just have to be careful. My set were pre made already lol

natman316

i wish i could get fender flares like c-63amg but i bet it will cost an arm and a leg here in the US. damn labor prices

ed4

natman, Roswell is right. My tires have a bit of a stretch, however there's about 1/2 of a centimeter of the rim protector that sticks out.








It's a huge improvement over my winter setup. Upon the recommendation from the Tire Rack, I bought 235 tires for my rears:





I get that narrow tires have better traction on snow, but come on!

noodleman

what are your rear offsets? I'm lowered on H&R springs with the 17mm rear spring pads running 19x10+53 with 265/30/19 PSSs in the rear and looks like this:

ed4

My rears are 19" x 10", ET50.

-ed

diego@vossen

callmiro

When

diego@vossen

Late summer time. We will give more updates in the next few months.

xcharlesy

hyped on this

wahlsten

No one?

yazid

Would you have the retail prices out yet?
Or even an estimated price list?