I agree.
Unfortunately they make it only in: Silver, Chrome and Matt Black.

 

Thinking of running a set of 20" wheels on a 63 sedan with H&R springs, what set ups are you guys running without any rubbing? Want to get as much tire as possible on the ground since traction is an obvious issue.. LOL

 

^^ it should be the same as 19inch set-up.

20x8.5 +40 w/245/30/20 front
20x10 +53 w/275/25/20 rear should be safe. U can try 285/25/20 but it will be close to rubbing on h&r drop.

I never had 20's so maybe someone who did can help u better.

 

A tad bit late....but as requested! Sadly not an M3 though, but an E30 nonetheless

 

Volk TE37 TTA

 

oh ****. someone finally did it. specs asap!

and it's still 100% accurate... looks good on any car

 

Thanks. They're 19 x 8.5 +45 and 19 x 9.5 + 50. Suspension by KW.

 

LOL I agree...the statement still holds true

 

Forgestar CF5 Gunmetal with RE-11

Front: 19x8.5 +40 (245/35-19)
Rear: 19x10 +55 (275/30-19)

Dropped on H&R springs. Fronts rub on huge dips. I think the rears are good.

 

Looking great! I'm surprised to hear you are rubbing in the front with 19x8.5 +40 & 245/35... It must be the tire brand as ur tires look meaty (?).

I will be running 19x9 +40 w/245/45 PSS in front... I hope I dont rub.

 

see more here:http://adv1wheels.com/gallery/merced...l63-adv10.0sf/

 

It will likely rub. The PSS has a wider tread width than the RE11 and your rim may bring the section width out a little more since it will stick out 6.4mm more than mine.

Glad I didn't go with 38mm lol...

 

Actually my tires look stretched on my 19x9, so I will report next month when I test fit them. Hope it won't be too bad.

 

Start at 7s. Embedded vid didn't start at set time fail...

 

That rubbing sound always makes me scare of damaging something... is it rubbing on the front fender lip? Or inner suspension?

 

Pretty much TDC of the lip. Will either grind the lip off or try and roll it.

Or just let it rub

 

^^ why not go down to 235/35/19? That's what I will do if my set rubs too much front & back. I will go 235/35 & 265/30

 

Or roll and keep the grip

 

I'm installing the coil overs tomorrow on my car. Hoping it all works out.

I'm running a 19 x 8.5 with a 30 offset. Tires are 225/35. Will be rolling the fenders as well.

Let's see how it goes

Kris

 

im scard now

will i rub on the front with +35 pss 235 35 19 no spacers???

 

You'll be fine even on H&R -20mm springs.
It's only on a serious drop with coilovers where you would have a problem with rubbing.

 

Thank god

 

What width? 8.5" +40 with a 245 on h&r springs and I rub.

 

Michelin PSS tires?


Here are two pics of my car when it was on H&R springs.

8x19 ET30 (15mm spacer) with 235/35/19 Pirelli P-Zero.
No rubbing.

 

RE11. Your 8" makes a difference. But looking at my 8.5 +40 and your 8 +30. The outside of your rim should stick out 3.7mm more than mine but it looks like it's inset more. Maybe my or your offset is incorrect? I should measure mine.


vs