I put in WORK
#1
Super Member
Thread Starter
Join Date: Sep 2009
Location: Seattle, WA
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG
I put in WORK
Well, it seems like everyone's getting wheels lately--here are mine. They just came in today, after waiting 6 months for them. Yes, six months.
They're WORK VS-XX in matte gunmetal. Front: 19x8.5 +40, Rear: 19x10.0 +51.
I've a set of Hankook Ventus V12 Evo's going on them tomorrow--245/35 front and 275/30 rear.
Enjoy.
With the VS-XX centercaps:
With the AMG centercaps off of eBay. I think it looks much better.
Rear lip is about 2.5 inches.
There was literally hair-thin space left between the rear calipers and the wheels. I was almost afraid it wasn't going to fit.
Front lip is a bit over 1.5 inches: whoopey.
However, there was a good quarter-inch clearance between the front calipers and the wheel. I think it would've been possible to be a bit more aggressive, but not too much.
And here are they are mounted on the car just to ensure they fit:
These last two pics are for superlubricity:
Front:
Rear:
Last one for the road:
They're WORK VS-XX in matte gunmetal. Front: 19x8.5 +40, Rear: 19x10.0 +51.
I've a set of Hankook Ventus V12 Evo's going on them tomorrow--245/35 front and 275/30 rear.
Enjoy.
With the VS-XX centercaps:
With the AMG centercaps off of eBay. I think it looks much better.
Rear lip is about 2.5 inches.
There was literally hair-thin space left between the rear calipers and the wheels. I was almost afraid it wasn't going to fit.
Front lip is a bit over 1.5 inches: whoopey.
However, there was a good quarter-inch clearance between the front calipers and the wheel. I think it would've been possible to be a bit more aggressive, but not too much.
And here are they are mounted on the car just to ensure they fit:
These last two pics are for superlubricity:
Front:
Rear:
Last one for the road:
Last edited by avengerboater; 05-06-2010 at 08:18 PM.
#7
Super Member
You crazy FOOL! Those are going to look wicked!!! But wow, the clearance is tight on the calipers. Make sure whoever puts the wheels on doesn't fumble around or they'll chip the paint on the calipers.
Trending Topics
#14
Super Member
Thread Starter
Join Date: Sep 2009
Location: Seattle, WA
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG
Thanks, guys!
I like how they look on your car.
Haha. I'm insane in the membrane! Yea, the rear caliper clearance is worrying me a bit. I can't wait to see your DTM bumper, though!
Thank you, fellas. They were ~$3600. The matte gunmetal color costs extra.
Ya, I figured you'd ask anyway. Haha. They're a bit on the heavy side for 19's, but hey--they're 3-piece wheels, and I've had a fetish for mesh wheels since the BBS LM's came out. I'll use my stockers for track days.
I like how they look on your car.
Thank you, fellas. They were ~$3600. The matte gunmetal color costs extra.
Ya, I figured you'd ask anyway. Haha. They're a bit on the heavy side for 19's, but hey--they're 3-piece wheels, and I've had a fetish for mesh wheels since the BBS LM's came out. I'll use my stockers for track days.
#17
Super Moderator Alumni
Join Date: Dec 2009
Location: USA
Posts: 2,189
Likes: 0
Received 6 Likes
on
4 Posts
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
PM me if you want to go.
Last edited by superlubricity; 05-06-2010 at 11:08 PM.
#18
MBWorld Fanatic!
#22
Super Member
Thread Starter
Join Date: Sep 2009
Location: Seattle, WA
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG
That's great!! I can't do the 14th, but I'm actually off on the 19th! I'm down. Gates open at 4:00 p.m. Is a helmet required at PR for test and tunes? I don't have one.
#24
Super Member
Thread Starter
Join Date: Sep 2009
Location: Seattle, WA
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
C63 AMG
Thank you, sirs! I can't wait to see them on the car, either.
Haha. There are quite a bit of bolts/rivets on these wheels.
Haha. There are quite a bit of bolts/rivets on these wheels.