My 18" Forgestar F14 wheels finally arrived . . .
05-28-2010, 06:38 PM
#1
Super Moderator Alumni
Thread Starter
Join Date: Dec 2009
Location: USA
Posts: 2,189
Likes: 0
Received 6 Likes
on
4 Posts
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
My 18" Forgestar F14 wheels finally arrived . . .
. . . but they won't be mounted until Sunday evening. 
Fronts are super-light @ 17.90-lbs, rears are a bit heavier @ 20.33-lbs. Specs are in my sig. I'll post a full write-up and a ton of photos in a couple days.
For now, here's a shot of them in their boxes.
Fronts are super-light @ 17.90-lbs, rears are a bit heavier @ 20.33-lbs. Specs are in my sig. I'll post a full write-up and a ton of photos in a couple days.
For now, here's a shot of them in their boxes.
Last edited by superlubricity; 05-28-2010 at 06:40 PM.
05-28-2010, 07:08 PM
#5
Super Moderator Alumni
Thread Starter
Join Date: Dec 2009
Location: USA
Posts: 2,189
Likes: 0
Received 6 Likes
on
4 Posts
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
Yes, Gun Metal finish and a very close match to Steel Grey.
Seriously. Thanks again, James.
Trending Topics
05-28-2010, 10:13 PM
#11
Senior Member
Join Date: Sep 2009
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
c63 amg
those wheels are smoking hot. They fit perfectly the bad boy look of the c63.
05-29-2010, 09:05 PM
#20
Super Moderator Alumni
Thread Starter
Join Date: Dec 2009
Location: USA
Posts: 2,189
Likes: 0
Received 6 Likes
on
4 Posts
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
No kidding. I knew going in the wait was going to be ridiculous. James @ ACGSD kept me updated throughout the wait. Thankfully I've been focused on other mods for the past 15-weeks. 
You could go wider and they'll fit the rims nicely but likely will rub without fender rolling, liner cutting, etc.
The 285/35-18 Nitto NT555R Drag Radials I have now barely fit. They are doing fine on the stock 9" wheel but they are only 11.22" wide and have very soft/round sidewalls. Definitely the exception and not the norm.
Anyhow, the offsets I chose are not too extreme as to cause additional rubbing or fitment concerns with any tire combo that is working with the OEM wheels. I'll know more and post more after I get them mounted up.
You could go wider and they'll fit the rims nicely but likely will rub without fender rolling, liner cutting, etc.
The 285/35-18 Nitto NT555R Drag Radials I have now barely fit. They are doing fine on the stock 9" wheel but they are only 11.22" wide and have very soft/round sidewalls. Definitely the exception and not the norm.
Anyhow, the offsets I chose are not too extreme as to cause additional rubbing or fitment concerns with any tire combo that is working with the OEM wheels. I'll know more and post more after I get them mounted up.
Last edited by superlubricity; 05-30-2010 at 12:32 AM. Reason: typo
05-30-2010, 10:35 AM
#24
Super Member
Join Date: Nov 2009
Location: Montreal, Canada
Posts: 690
Likes: 0
Received 1 Like
on
1 Post
2021 Taycan Turbo, 2018 Radical SR3, 2021 Lincoln Aviator
Aren't the 18s borderline dangerous with the weight of our car? They can handle 1200lbs per wheel (maximum load). Just sitting there, the load is 1000lbs on each corner for our car. Tracking the car will easily reach that load.
That's the advantage of the 19s, which can handle 1500lbs per wheel. But then they are heavier. What did Forgestar say about it?
I'd also love 18s!
That's the advantage of the 19s, which can handle 1500lbs per wheel. But then they are heavier. What did Forgestar say about it?
I'd also love 18s!
05-30-2010, 11:50 AM
#25
Super Moderator Alumni
Thread Starter
Join Date: Dec 2009
Location: USA
Posts: 2,189
Likes: 0
Received 6 Likes
on
4 Posts
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
Anyhow, I'll get into the whole load rating thing in my write-up tonight. More to come there.
