olszowa12

I've searched on MBWorld and google and have nothing. I've seen your thread but the links to the pics there are not valid any more. If you could post the pics I would be really grateful TIA Sheep

Kaiba

Can you post a close-up of the COMMAND face ?

It seems its a bit too much "over the top". A good close-up and side view could better tell.

Thanks for the pictures anyway !!

elidolo

more pics of the kit of 32 pieces please, larger pics and door panels

Sheep

Will do once I get off work soon. Please stand by.

Sheep
p.s. thank god I saved the pics lol.
p.p.s. MY2009 Sahara Beige with H73 carbon fiber trim.

olszowa12

Thanks for the pics I'm not sure I like it. I just got bored of my dark wood trim and wanted something new but it looks better than CF on sahara beige IMO.

Sheep

Yeah, the overall tone and feel for beige with dark wood is very close to beige with CF. Here is an idea: how about getting some aluminum trim piece and paint/coat them? I bet a beige with copper/gold trim will look really sharp.

Sheep

mr-flyer

this is what i'm thinking of doing.. painting the aluminum pieces red to match my car and black interior.. now if i can only find someone willing to sell his pieces.. anybody got part numbers for them or how much they cost at dealership?

emericr

Thanks for the pics with the sahara interior. It really looks sharp.
As far as the install is concerned. Did you have to take the pieces out and then apply the laminate or where you able to apply the CF on the piece itself in the car and then with some plastic tool, bend the edges.
This really looks great and the price is right.
BTW, I love your wheel but I just can't digest the price.

killacam7479

Anyone having issues with the ash tray cover not going in and out smoothly now that there is an extra layer on there?

harrower

In my case the pieces came pre-cut for OEM fitment. They had 3M tape on the back so install was easy and required no laminate. As far as making the parts fit tight I used a rubber spatula to push the part into place where fingers could not reach - such as the end of the door arm rest. This worked well and did not leave any marks at all. Overall I think that this is good and cheap mod for those who like CF look.

harrower

Yes this is an issue I have with the DCT CF trim I bought. Not with this product. I think the issue is that with the increase in thickness of the ashtray cover, there is some stickiness with the spring loading so it does not spring back like it did with alloy OEM trim. I am fine with that as I leave this shut all the time.

harrower

more pics atttached of installed trim as promised

Sheep

Looks good... almost carbon over load lol. No wonder you were busy .

Sheep

olszowa12

HIRO could you take some high quality pictues with a camera without the flash ? I would really appraciate that! Thanks

betrezra

Based on this thread I just bought the W209 kit for my 04clk55...... I'll post pics for the w209 boys.

Thx.

jguye

Harrower, in the last 2 weeks I have been sending messages via their ebay site before I order BUT they don't reply ? What other contact details can you share for these vendors ?

harrower

which set were you looking to order? The set I ordered and installed was this one.
http://cgi.ebay.com/ebaymotors/2008-...ts_Accessories
Tel: 1-800-880-9906

jguye

Yes, that is the ebay site I have been sending emails, but no reply for 2 weeks ? Do you have any other direct email addresses for them ? Thanks again for your assistance.

Chemical7

Cool! I just ordered a set for my little monster!

harrower

Not sure why you did not go to their website address which is listed in the eBay listing but none the less here is the information - DirectCarTrim@aol.com or by phone at 954-522-5477 or 1-800-880-9906

1140 NE 7th Ave, # 3
Fort Lauderdale, FL 33304

You can order through their site as well. Why not give them a call since they have a toll-free telephone number?

harrower

My apologies....just saw your sig and the fact you are located down-under. Hence why toll-free is useless. Drop them a email at AOL account above.

_AMG_

It looks RREEAALLLY good. Judging by the pics they look like quality pieces.

harrower

FYI - if anyone is interested I am running a GB on 9 piece core CF trim as per GB board at https://mbworld.org/forums/group-pur...ml#post4257229

JonMBZ

I think the command controls ac vents and command cover are a little too much. It looks cheap and out of place. Other than that I think the quality looks great nice find guys

denot

Sorry to revive old thread, but why are you running this GB? Is your current CF "cover" trim doesnt last that long? Any problem with it? Coz I was about to order the same thing as yours from the Ebay seller