Secondary cat delete pipe sneak peek W/Pics
#26
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 796 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
Im not sure if you saw Lukes post above but is there something in the works for the W212? (secondary cat delete x pipe)
#27
MBWorld Fanatic!
Join Date: May 2005
Location: Naples FL
Posts: 2,925
Received 167 Likes
on
133 Posts
2021 Porsche TTS
Well there we go again. Price out of control. GT pro's X pipe is cheaper and is the exact same product...
I was hoping to promote forum sponsors but it appears I will probably buy the down pipes and X pipe from GTpro...
I was hoping to promote forum sponsors but it appears I will probably buy the down pipes and X pipe from GTpro...
#28
Former Vendor of MBWorld
Thread Starter
#29
MBWorld Fanatic!
I also noticed there is only a single weld down the middle where the MBH X pipe meets. Also on the GTPRO x pipe that the welds are a cross, down the middle and around the diameter of where the X pipe meets. Just minor differences here and there.
MBH's looks alot cleaner, then GT Pro's imo
Last edited by _AMG_; 12-09-2010 at 01:43 PM.
#30
Member
Join Date: Mar 2008
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
'09 C63 Performance Package - Steel Grey/Sahara Biege
Oooo, we're so close. If that piece was a little longer and deleted the primary cat as well, I'd be all over it at that same $695 + free ship price point.
That said, very nice work MBH. It looks like a great, high-quality piece.
That said, very nice work MBH. It looks like a great, high-quality piece.
#31
MBWorld Fanatic!
GTPro fits together as well as a 1950s airfix model kit....with a little filing, welding, putty, creativity anything can fit
Last edited by GHAZAN; 12-09-2010 at 03:24 PM.
#32
MBWorld Fanatic!
LOL, True. I have heard of they're pipes not fitting in right. Thats the main reason why I went with the MBH becuase no one has had problems with them.
Last edited by _AMG_; 12-09-2010 at 05:07 PM.
#33
MBWorld Fanatic!
Join Date: May 2005
Location: Naples FL
Posts: 2,925
Received 167 Likes
on
133 Posts
2021 Porsche TTS
Please share with me the members that state that GT-pros parts do not fit. I have no allegiance to GT-pro, feel free to check my posts where I am obviously critical about his products but I do not feel it is fair to state that his parts do not fit.
Just because he is not a forum sponsor does not mean we should throw him under the bus.
I only have seen one member state that his did not fit properly but all others stated the fit and finish was right on.
Last time I checked $650 and $695 is not the same price, that is close to 10% and GTpro offers a discount if you buy both his Xpipe and his downpipes.
Just because he is not a forum sponsor does not mean we should throw him under the bus.
I only have seen one member state that his did not fit properly but all others stated the fit and finish was right on.
Last time I checked $650 and $695 is not the same price, that is close to 10% and GTpro offers a discount if you buy both his Xpipe and his downpipes.
#34
MBWorld Fanatic!
lets not tarnish MBHs thread anymore than we have...btw 650 and 695 are the same price...let's get real 45 bucks. We are talking about quality, performance, AND fitment. I think it's worth it.
#35
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 796 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
In my best Espanol: Cuando!!!!!!!!!!
As for the pricing of competitors- if you dont like the price here buy the other one or pick up the phone and ask the sponsor in this thread to reduce his price.
Sponsors fuel this site- we dont make it an obligation for any of you to buy their products. Let them set the price point and see if it sells or not.
As for the pricing of competitors- if you dont like the price here buy the other one or pick up the phone and ask the sponsor in this thread to reduce his price.
Sponsors fuel this site- we dont make it an obligation for any of you to buy their products. Let them set the price point and see if it sells or not.
#36
MBWorld Fanatic!
Join Date: May 2005
Location: Naples FL
Posts: 2,925
Received 167 Likes
on
133 Posts
2021 Porsche TTS
Ghazan: just because it is small dollars does not mean that it is less relevant. I should hope you would agree that a 55K C63 is different than 50K C63...
MBH makes outstanding product and I agree we should not reduce this thread to a comparison with a non forum sponsor but I just refused to be gouged.
MBH makes outstanding product and I agree we should not reduce this thread to a comparison with a non forum sponsor but I just refused to be gouged.
#37
Former Vendor of MBWorld
Thread Starter
Ghazan: just because it is small dollars does not mean that it is less relevant. I should hope you would agree that a 55K C63 is different than 50K C63...
MBH makes outstanding product and I agree we should not reduce this thread to a comparison with a non forum sponsor but I just refused to be gouged.
MBH makes outstanding product and I agree we should not reduce this thread to a comparison with a non forum sponsor but I just refused to be gouged.
I hear your gripe, We offer a non xpipe version of this for $100 less. If you look inside the stock C63 resonator there is a crossover hole meant to help mixing. Some theorist say thats all you need. Fact is xpipes made by hand are not the easiest thing to make. factor that in with materials, skilled labor, fixturing, finishing, shop expenses. It adds up. We are doing the best we can to offer a wide range of performance products, while trying to makes something that hopefully fits into a wider range of peoples budgets.
For the next week, I'm offering free shipping to the lower 48 states for MBW members that order from me directly. If you factor that in. It seems right on par with what ever else is out there.
There is a whole behind the scenes thing that takes place. No one, but me and my team gets to see that. If you did... you would know I'm trying to go to bat for everyone. However I understand I can't win them all.
Last edited by MBH motorsports; 12-10-2010 at 02:43 AM.
#38
MBWorld Fanatic!
I hear your gripe, We offer a non xpipe version of this for $100 less. If you look inside the stock C63 resonator there is a crossover whole meant to help mixing. Some theorist say thats all you need. Fact is xpipes made by hand are not the easiest thing to make. factor that in with materials, skilled labor, fixturing, finishing, shop expenses. It adds up. We are doing the best we can to offer a wide range of performance products, while trying to makes something that hopefully fits into a wider range of peoples budgets.
For the next week, I'm offering free shipping to the lower 48 states for MBW members that order from me directly. If you factor that in. It seems right on par with what ever else is out there.
There is a whole behind the scenes thing that takes place. No one, but me and my team gets to see that. If you did... you would know I'm trying to go to bat for everyone. However I understand I can't win them all.
For the next week, I'm offering free shipping to the lower 48 states for MBW members that order from me directly. If you factor that in. It seems right on par with what ever else is out there.
There is a whole behind the scenes thing that takes place. No one, but me and my team gets to see that. If you did... you would know I'm trying to go to bat for everyone. However I understand I can't win them all.
Keep up the great work MBH!!
#41
MBWorld Fanatic!
That is what I thought (going on my poor memory). But then I see his secondary cats with a slip-joint where it should've connected to a primart cat.
#45
MBWorld Fanatic!
#47
Member
Join Date: Sep 2009
Location: Hong Kong
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
W204 C63 /// E92 M3
thread bump!
sorry for the random noob question..
but what is the different with secondary cat delete w/ straight pipe vs. secondary cat delete w/ x-pipe??
Thanks
sorry for the random noob question..
but what is the different with secondary cat delete w/ straight pipe vs. secondary cat delete w/ x-pipe??
Thanks